ARVADA, CO —
OSHA Inspection: BLACK HOUND DESIGN COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BLACK HOUND DESIGN COMPANY in 4941 ALLISON STREET UNIT 5, ARVADA, CO 80002 (NAICS 337211). OSHA activity number 341677300.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BLACK HOUND DESIGN COMPANY
- Site address
- 4941 ALLISON STREET UNIT 5
- City
- ARVADA
- State
- CO
- ZIP
- 80002
- Mailing
- 4941 ALLISON STREET UNIT 5, ARVADA, CO 80002
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337211
- Employees
- 8
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.213 C01
- Issued
- Aug 23, 2016
- Abate by
- Aug 29, 2016
- Penalty
- Initial $3,741 · Current $3,741
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) On or about August 3, 2016, and at times prior, employees were exposed to amputation hazards due to the non-required utilization of the automatically adjusting hood while operating the Altendorf 1251 table saw. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
- — Z (S) $3741
1910.213 C02
- Issued
- Aug 23, 2016
- Abate by
- Aug 31, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) On or about August 3, 2016, and at times prior, employees were exposed to struck-by hazards while operating the Altendorf 1251 table saw with no spreaders in place. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
- — Z (S) $0
1910.213 C03
- Issued
- Aug 23, 2016
- Abate by
- Aug 31, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) On or about August 3, 2016, and at times prior, employees were exposes to struck-by injuries while operating the Altendorf 1251 Sliding Table Saw with no kickback fingers or dogs in place. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
- — Z (S) $0
1904.29 A
- Issued
- Aug 23, 2016
- Abate by
- Aug 31, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.29(a): The employer did not use an OSHA 300, 301 and 300A Form or equivalent. a) On or about November 13, 2015, the employer did not maintain OSHA 300, 301 or 300A or equivalent forms for recording injuries and illnesses of employee's located at Black Hound Design Company. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
- — Z (O) $0
More inspections at Black Hound Design Company
View Black Hound Design Company's full OSHA safety record →
More inspections in this industry (NAICS 337211)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341677300.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.