Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: REGAL STEEL ERECTORS, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of REGAL STEEL ERECTORS, LLC in 400 W. HURON ST., CHICAGO, IL 60654 (NAICS 238120). OSHA activity number 341688646.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Regal Steel Erectors, LLC — free Get an email when a new federal OSHA severe-injury report for Regal Steel Erectors, LLC is published. One employer, no account, unsubscribe in one click.
Site address
400 W. HURON ST.
City
CHICAGO
State
IL
ZIP
60654
Mailing
850 TOLLGATE RD., ELGIN, IL 60123
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
8
Ownership type
A

4 citations on file for this inspection.

1926.20 B02

Serious Gravity 5 1 instance 6 exposed
Issued
Nov 9, 2016
Abate by
Nov 16, 2016
Penalty
Initial $2,672 · Current $1,500 Reduced
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):     a.  On or about August 11, 2016, at the above addressed jobsite, the competent person onsite did not inspect the equipment necessary to perform steel erection and related activities in a safe manner.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2672

1926.761 B

Serious Gravity 5 1 instance 6 exposed
Issued
Nov 9, 2016
Abate by
Nov 16, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.761(b): The employer did not train each employee exposed to a fall hazard in accordance with the requirements of 29 CFR 1926.761:   a.  On or about August 11, 2016, at the above addressed jobsite, employees conducting metal decking and steel erection operations were exposed to fall hazards as a result of the employer failing to institute a training program and ensure that employees receive the training.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.760 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Nov 9, 2016
Abate by
Nov 16, 2016
Penalty
Initial $3,741 · Current $2,500 Reduced
29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems:    a.  On or about August 11, 2016, at the above addressed jobsite, an employee conducting metal decking and steel erection operations was exposed to falls of seventeen (17') feet seven (7") inches created by the presence of unprotected sides and edges.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $3741

1926.760 B03

Serious Gravity 10 1 instance 6 exposed
Issued
Nov 9, 2016
Abate by
Nov 16, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.760(b)(3): Each connector working at heights over 15 and up to 30 feet above a lower level, was not provided with a personal fall arrest system, positioning device system or fall restraint system and wear the equipment necessary to be able to be tied off; or was not provided with other means of protection from fall hazards in accordance with paragraph (a)(1) of this section:  a.  On or about August 11, 2016, at the above addressed jobsite, an employee conducting steel erection operations was exposed to falls of seventeen (17') feet seven (7") inches, in that the employee did have the equipment necessary to tie off.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Regal Steel Erectors, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341688646.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.