DORAVILLE, GA —
OSHA Inspection: ILLING COMPANY, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of ILLING COMPANY, INC. in 2235 BUTTON GWINNETT, DORAVILLE, GA 30340 (NAICS 323111). OSHA activity number 341691111.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ILLING COMPANY, INC.
- Site address
- 2235 BUTTON GWINNETT
- City
- DORAVILLE
- State
- GA
- ZIP
- 30340
- Mailing
- 2235 BUTTON GWINNETT, DORAVILLE, GA 30340
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 90
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.133 A01
- Issued
- Jan 26, 2017
- Abate by
- Feb 8, 2018
- Penalty
- Initial $8,873 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from potentially injurious UV light radiation: a) Illing Compnay, Inc., Doraville, GA - In the production area, employees were exposed to irreversible eye damage when ultraviolet protective (UV) eye wear was not required or enforced for employees exposed to ultra violet (UV) lights from the Osmo Novax M-UV3 and Kammann UV Bottle printing machines and which had protective shields removed or broken, on or about 08/10/2016.
Recent events (3)
- — F (S) $2100
- — C (S) $8873
- — Z (S) $8873
1910.147 C01
- Issued
- Jan 26, 2017
- Abate by
- Mar 15, 2018
- Penalty
- Initial $8,873 · Current $7,100 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: Illing Company, Inc., Doraville, GA - In the production area, employees were allowed to maintenance and servicing on OMSO Novax M - UV 3 and Kammann UV Bottle Printers without using machine specific LOTO procedures to secure all energy sources, on or about 8/10/16.
Recent events (3)
- — F (S) $7100
- — C (S) $8873
- — Z (S) $8873
1910.178 L01 I
- Issued
- Jan 26, 2017
- Abate by
- Mar 15, 2018
- Penalty
- Initial $8,873 · Current $4,500 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Illing Company, Inc., Doraville, GA - Employees were observed operating two sit down, electric forklifts and two sit down propane forklifts, and had not complete the training and certification as required paragraph (l) of this standard, on or about 08/10/2016. b) Illing Company, Inc., Doraville, GA - Employees were observed operating the Crown side shifter forklift and had not complete the training and certification as required in paragraph (l) of this standard, on or about 08/10/2016. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (S) $4500
- — C (S) $8873
- — Z (S) $8873
1910.212 A03 II
- Issued
- Jan 26, 2017
- Abate by
- Apr 5, 2018
- Penalty
- Initial $8,873 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Illing Company, Inc., Doraville, GA, In the production area, employees were allowed to work with the OMSO Novax M - UV 3 machine and the Kammann UV Bottle Printers without adequate guarding. The point of operations did not meet stationary or interlocked movable guarding requirements established by the American National Standard Institute (ANSI) for Graphic Technology Safety Standard Printing Press Systems, Section 7 or equivalent protective measures, on or about 8/10/16.
Recent events (3)
- — F (S) $5000
- — C (S) $8873
- — Z (S) $8873
1910.1200 H03 IV
- Issued
- Jan 26, 2017
- Abate by
- Feb 22, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): Employees had not been provided with GHS 2012 training including an explanation of the labels received on shipped containers and the workplace labeling system to be used by their employer; the safety data sheet, including the order of information, and how employees can obtain and use the appropriate hazard information: Illing Company, Inc., Doraville, GA - In the production area, employees handle hazardous chemicals such as, but is not limited to graphic press wash, screen ink, etc. Information and training under the new globally harmonized system (GHS) such as, but not limited to labeling system, and written hazard communication program had not been conducted, on or about 08/10/16. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Jan 26, 2017
- Abate by
- Feb 22, 2018
- Penalty
- Initial $3,802 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: Illing Company, Inc., Doraville, GA - In the production area, employees handle hazardous chemicals such as, but is not limited to graphic press wash, screen ink, etc. The employer had not developed a written hazard communication program, on or about 08/10/16. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (O) $1000
- — C (S) $3802
- — Z (S) $3802
More inspections at Illing Company, INC.
View Illing Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323111)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341691111.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.