ALPHARETTA, GA —
OSHA Inspection: JUAN ROMERO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JUAN ROMERO in LOT #26 FORTE LANE, ALPHARETTA, GA 30009 (NAICS 238170). OSHA activity number 341723898.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JUAN ROMERO
- Site address
- LOT #26 FORTE LANE
- City
- ALPHARETTA
- State
- GA
- ZIP
- 30009
- Mailing
- 5923 OAK ROAD, DORAVILLE, GA 30340
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Aug 29, 2016
- Penalty
- Initial $2,138 · Current $2,138
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: (a) New townhome construction on Lot #26, West side scaffold: On or about August 24, 2016, and at times prior, the employer exposed employees to eye injuries while operating pneumatic nail guns at 90 PSI, in that protective eyewear was not provided to employees installing cornice boards.
Recent events (1)
- — Z (S) $2138
1926.304 D
- Issued
- Aug 29, 2016
- Penalty
- Initial $3,741 · Current $3,741
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe: (a) New townhome construction on Lot #26, West side work bench: On or about August 24, 2016, and at times prior, the employer exposed employees to severe laceration and amputation hazards while operating a circular saw, in that the lower guard was not in place during use while employees were cutting cornice boards.
Recent events (1)
- — Z (S) $3741
1926.451 G01 I
- Issued
- Aug 29, 2016
- Penalty
- Initial $3,741 · Current $3,741
General-duty citation text
29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system: (a) New townhome construction, West side scaffold: On or about August 24, 2016, and at times prior, the employer exposed employees to fall hazards of 20-feet, 5-inches from the ladder jack scaffold platform, in that a personal fall arrest system was not provided to employees installing cornice boards.
Recent events (1)
- — Z (S) $3741
1926.452 K01
- Issued
- Aug 29, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.452(k)(1): Platforms exceeded a height of 20 feet (6.1 m): (a) New townhome construction on Lot #26, West side scaffold: On or about August 24, 2016, and at times prior, the employer exposed employees to falls hazards of approximately 20-feet, 5-inches from the scaffold platform, in that the ladder jack scaffold was used over the height of 20-feet which is prohibited by the manufacturer.
Recent events (1)
- — Z (S) $0
More inspections at Juan Romero
View Juan Romero's full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341723898.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.