REXBURG, ID —
OSHA Inspection: DL BECK, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DL BECK, INC in 113 E VIKING, REXBURG, ID 83440 (NAICS 236220). OSHA activity number 341729309.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DL BECK, INC
- Site address
- 113 E VIKING
- City
- REXBURG
- State
- ID
- ZIP
- 83440
- Mailing
- 2860 WEST 5200 SOUTH, REXBURG, ID 83440
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 51
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.20 B01
- Issued
- Nov 8, 2016
- Abate by
- Dec 6, 2016
- Penalty
- Initial $3,742 · Current $0 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): The employer did not initiate and maintain such programs as may be necessary to comply with this part. a) On or about August 2, 2016, and at times prior thereto, the employer had not developed and/or implemented an accident prevention program to address hazards to which their employees are exposed. Hazards include but are not limited to, employees using skillsaws without the use of proper safety glasses, and exposure to overhead hazards without donning a hardhat. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $3742
1926.20 B02
- Issued
- Nov 8, 2016
- Abate by
- Dec 6, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(2): The employer did not initiate and maintain a safety program which provides for frequent and regular inspections of jobsites, materials, and equipment to be made by a competent person: a) On or about August 2, 2016, and at times prior thereto, the employer did not perform effective frequent and regular inspections of the jobsite that they controlled to identify, correct and/or eliminate hazards to which their employees and/or the employees of subcontractors were exposed. Hazards include but are not limited to, employees working at elevated heights which require ladders, employees using portable tools without a grounding prong, employees using skill saws without the use of proper safety glasses, and exposure to overhead hazards without donning a hardhat. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.28 A
- Issued
- Nov 8, 2016
- Abate by
- Dec 6, 2016
- Penalty
- Initial $0 · Current $1,871
General-duty citation text
29 CFR 1926.28(a): The employer did not require the wearing of appropriate personal protective equipment in all operations where there is an exposure to hazardous conditions. (a) On or about August 2, 2016, and at times prior thereto, employees exposed to hazardous conditions were not required to don appropriate personal protective equipment, such as but not limited to use safety glasses while using skillsaws and other portable power tools. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $1871
- — Z (S) $0
1926.403 B01
- Issued
- Nov 8, 2016
- Abate by
- Dec 6, 2016
- Penalty
- Initial $3,742 · Current $1,871 Reduced
General-duty citation text
29 CFR 1926.403(b)(1): 29 CFR 1926.403(b)(1): Employer did not ensure that electrical equipment is free from recognized hazards that are likely to cause death or serious physical harm to employees: (a) On or about August 2, 2016, and at times prior thereto, Skillsaw, serial 412002721 did not have a grounding prong. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $1871
- — Z (S) $3742
1926.404 F06
- Issued
- Nov 8, 2016
- Abate by
- Dec 6, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: (a) On or about August 2, 2016, and at times prior thereto, Skillsaw, serial 412002721, did not have a grounding prong. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B15
- Issued
- Nov 8, 2016
- Abate by
- Dec 6, 2016
- Penalty
- Initial $3,742 · Current $1,871 Reduced
General-duty citation text
29 CFR 1926.1053(b)(15): Ladders shall be inspected by a competent person for visible defects on a periodic basis and after any occurrence that could affect their safe use. (A) On or about August 2, 2016 and at times prior thereto, the Tool-tray on a Louisville 6 foot ladder, model FS 2006 was damaged. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $1871
- — Z (S) $3742
1926.1053 B16
- Issued
- Nov 8, 2016
- Abate by
- Dec 6, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(16): Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, were not either immediately marked in a manner that readily identified them as defective, or tagged with "Do Not Use" or similar language, and were not withdrawn from service until repaired: (a) On or about August 2, 2016, and at times prior thereto, Louisville 6 foot ladder, model FS 2006. Note: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at DL Beck, INC
View DL Beck, INC's full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341729309.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.