ERIE, PA —
OSHA Inspection: ESSENTRA PLASTICS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ESSENTRA PLASTICS, LLC in 2614 MCCLELLAND AVENUE, ERIE, PA 16510 (NAICS 326199). OSHA activity number 341735009.
Where did this inspection happen?
- Establishment
- ESSENTRA PLASTICS, LLC
- Site address
- 2614 MCCLELLAND AVENUE
- City
- ERIE
- State
- PA
- ZIP
- 16510
- Mailing
- 2614 MCCLELLAND AVENUE, ERIE, PA 16510
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 28
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.151 C
- Issued
- Abate by
- Penalty
- Initial $4155.00 · Current $4155.00
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: A.) Essentra Plastics, LLC dba Essentra Components, 2614 McClelland Avenue, Erie, PA 16510, forklift charging area, on or about August 24, 2016 and time prior thereto: Employees are provided with an emergency eye wash and shower when performing work operations including, but not limited to, checking forklift battery levels and adding water. The eye wash station and emergency shower was last inspected in April 2013.
Recent events (3)
- — F (S) $4155
- — C (S) $4155
- — Z (S) $4155
1910.242 B
- Issued
- Abate by
- Penalty
- Initial $8311.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: A.) Essentra Plastics, LLC dba Essentra Components, 2614 McClelland Avenue, Erie, PA 16510, vinyl dip machine #3, on or about August 24, 2016 and time prior thereto: Employees utilize an air nozzle when performing work operations, including but not limited to, dip molding. The pressure at the tip of the nozzle was 70 psi. B.) Essentra Plastics, LLC dba Essentra Components, 2614 McClelland Avenue, Erie, PA 16510, vinyl dip machine #1, on or about August 24, 2016 and time prior thereto: Employees utilize an air nozzle when performing work operations, including but not limited to, dip molding. The pressure at the tip of the nozzle was 40 psi.
Recent events (3)
- — F (S) $0
- — C (S) $8311
- — Z (S) $8311
1904.29 B06
- Issued
- Abate by
- Penalty
- Initial $1385.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1904.29(b)(6): The employer did not enter "privacy case" in the space normally used for the employee's name on the OSHA 300 form or equivalent: A.) Essentra Plastics, LLC dba Essentra Components, 2614 McClelland Avenue, Erie, PA 16510, on or about December 22, 2016 and time prior thereto: The employer entered the employee's name on the 2016 OSHA 300 Form that resulted in a privacy concern case.
Recent events (3)
- — F (O) $0
- — C (O) $1385
- — Z (O) $1385
1910.22 A02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition: A.) Essentra Plastics, LLC dba Essentra Components, 2614 McClelland Avenue, Erie, PA 16510, interior south side of the building, on or about August 24, 2016 and time prior thereto: Storm water was leaking into the building from a seeping walls posing a slip/fall hazard. B.) Essentra Plastics, LLC dba Essentra Components, 2614 McClelland Avenue, Erie, PA 16510, interior south side of the building, on or about August 24, 2016 and time prior thereto: Storm water was leaking into the building from a leaking roof posing a slip/fall hazard.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.303 B02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: A.) Essentra Plastics, LLC dba Essentra Components, 2614 McClelland Avenue, Erie, PA 16510, vinyl dip machine #1, on or about August 24, 2016 and time prior thereto: A Power Sentry relocatable power tap was utilized to power electrical equipment including, but not limited to, a Dayton 9MRP6 fan and a Dayton 1UM40 fan. The power tap was not listed and labeled for industrial use.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at ESSENTRA PLASTICS, LLC
ERIE, PA—2021-10-22 00:00:00
ESSENTRA PLASTICS, LLC
ERIE, PA—2021-10-22 00:00:00
ESSENTRA PLASTICS, LLC
ERIE, PA—2019-05-31 00:00:00
ESSENTRA PLASTICS, LLC
ERIE, PA—2019-05-22 00:00:00
ESSENTRA PLASTICS, LLC
ERIE, PA—2017-01-12 00:00:00
ESSENTRA PLASTICS, LLC
View ESSENTRA PLASTICS, LLC's full OSHA safety record →
More inspections in this industry (NAICS 326199)
CONNEAUT, OH—2026-07-13
CONTINENTAL STRUCTURAL PLASTICS
PETALUMA, CA—2026-07-10
LABCON NORTH AMERICA
KEEWATIN, MN—2026-07-09
111565 - TACKLE TAMER PRODUCTS INC
EAST FLAT ROCK, NC—2026-07-09
161517 - ELKAMET, INC.
LANESBOROUGH, MA—2026-07-08
LANSEN MOLD CO., INC.
More inspections in PA
MILTON, PA—2026-07-10
HOMETOWN FOODS CHEF BOYARDEE CO.
SUNBURY, PA—2026-07-10
DEMPSEY UNIFORM & LINEN SUPPLY, INC
LANDISVILLE, PA—2026-07-10
FAIRVIEW DEMOLITION LLC
YORK, PA—2026-07-10
AMERICAN SPECIALTY SYSTEMS INC.
WILLIAMSPORT, PA—2026-07-10
INTERNATIONAL PAINT PROS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341735009.