OSHA Inspection: HAZAEL LEDEZMA DBA H&L MASONRY, INC.

Issued

Dec 15, 2016

Abate by

Jan 20, 2017

Penalty

Initial $300 · Current $300

General-duty citation text

29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:    Hazael Ledezma dba H&L Masonry, Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                       Item Number                            Abatement Date  01                                            01                                            11/15/2016  01                                            02a                                           10/18/2016  01                                            02b                                           10/18/2016    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Oct 12, 2016

Abate by

Nov 15, 2016

Penalty

Initial $2,940 · Current $2,940

General-duty citation text

29 CFR 1926.602(d): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178:     29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    a) On or about August 30, 2016, the employer did not train and evaluate employees operating the Gradall 544C-10 all-terrain forklift.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Oct 12, 2016

Abate by

Oct 18, 2016

Penalty

Initial $4,115 · Current $4,115

General-duty citation text

29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:     a)  On August 30, 2016, employees engaged in masonry work were not protected from fall hazards of approximately 40 feet to the ground, while working along an unprotected edge of the deck.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Oct 12, 2016

Abate by

Oct 18, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.501(b)(3):  Each employee in a hoist area was not protected from falling 6 feet (1.8 m) or more to lower levels by guardrail systems or personal fall arrest systems:     a)  On August 30, 2016, employees were exposed to the hazard of falling approximately 40 feet to the ground while working in the hoist area.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.