GRETNA, NE —
OSHA Inspection: TRADE WELL PALLET, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of TRADE WELL PALLET, INC. in 22801 FAIRVIEW ROAD, GRETNA, NE 68028 (NAICS 321920). OSHA activity number 341756906.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRADE WELL PALLET, INC.
- Site address
- 22801 FAIRVIEW ROAD
- City
- GRETNA
- State
- NE
- ZIP
- 68028
- Mailing
- P O BOX 310, GRETNA, NE 68028
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 80
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A05
- Issued
- Jan 31, 2017
- Abate by
- Feb 27, 2017
- Penalty
- Initial $6,338 · Current $6,338
General-duty citation text
29 CFR 1910.212(a)(5): Fan blade guards, where the periphery of the blades was less than seven feet above the floor or working level, had openings larger than one half inch: The employer is failing to protect employees from an amputation hazard. This was most recently documented on September 8, 2016 T 22801 Fairview Rd. Gretna, Nebraska. The employer failed to ensure that the pedestal fan being used along side the pallet saw was guarded in accordance with this sub part. The fan was in use and missing a 6 inch portion of the guard in the center of the fan blades.
Recent events (1)
- — Z (S) $6338
1910.305 G02 III
- Issued
- Jan 31, 2017
- Abate by
- Feb 27, 2017
- Penalty
- Initial $5,070 · Current $5,070
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: The employer is failing to protect employee from hazardous associated with the lack of strain relief. This hazard was most recently documented on September 8, 2016 at 22801 Fairview Rd. Gretna, Nebraska. The employer is failing to ensure the electrical cord was not in such a condition as to prevent the transmit of tension to the conductors terminal within the plug.
Recent events (1)
- — Z (S) $5070
1910.132 D02
- Issued
- Jan 31, 2017
- Abate by
- Mar 20, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2): The employer is failing to document the workplace hazard assessment. This was most recently observed on September 8, 2016 at 22801 Fairview Rd. Gretna, Nebraska. The employer failed to document the hazard assessment of the work operation involving dismantling pallets and the use of the pallet band saw.
Recent events (1)
- — Z (O) $0
1910.1200 H03 IV
- Issued
- Jan 31, 2017
- Abate by
- Mar 20, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information: The employer is failing to ensure that employees are trained on this sub part. This was most recently documented on September 8, 2016 at 22801 Fairview Rd. Gretna, Nebraska. Employees who had been working for the company prior to the implementation of the new Global harmonious System (GHS) have not been trained in accordance with this sub part.
Recent events (1)
- — Z (O) $0
More inspections at Trade Well Pallet, INC.
View Trade Well Pallet, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341756906.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.