DERRY, PA —
OSHA Inspection: D & G STEEL, INC.
Unprogrammed Related inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Related health inspection of D & G STEEL, INC. in 103 BELLS WAY, DERRY, PA 15627 (NAICS 238120). OSHA activity number 341867786.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D & G STEEL, INC.
- Site address
- 103 BELLS WAY
- City
- DERRY
- State
- PA
- ZIP
- 15627
- Mailing
- 103 BELLS WAY, DERRY, PA 15627
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238120
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.1025 D02
- Issued
- Nov 23, 2016
- Penalty
- Initial $1,604 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1025(d)(2): An initial determination was not made to determine if any employee may be exposed to lead at or above the action level: a) At worksite, on or about October 6, 2016 - An initial determination was not made to determine if an employee may be exposed to lead at or above the action level for an employee that was performing torch cutting operations.
Recent events (2)
- — I (S) $0
- — Z (S) $1604
1910.1018 E01 I
- Issued
- Nov 23, 2016
- Penalty
- Initial $0 · Current $1,000
General-duty citation text
29 CFR 1910.1018(e)(1)(i): Determinations of airborne exposure levels were not made from air samples that were representative of each employee's exposure to inorganic arsenic over an eight hour period: (Construction Reference: 1926.1118) a) At worksite, on or about October 6, 2016 - An initial determination was not made to determine if an employee may be exposed to arsenic for an employee that was performing torch cutting operations until the employer performed an employee exposure assessment.
Recent events (2)
- — I (S) $1000
- — Z (S) $0
1926.62 D02 V A
- Issued
- Nov 23, 2016
- Penalty
- Initial $1,604 · Current $1,000 Reduced
1591
General-duty citation text
29 CFR 1926.62(d)(2)(v)(A): Appropriate respiratory protection in accordance with paragraph (f) of this section. a) At the worksite, Parkway Center Mall, on or about October 6, 2016 - Appropriate respiratory protection was not provided for an employee that was performing torch cutting operations until the employer performed an employee exposure assessment.
Recent events (2)
- — I (S) $1000
- — Z (S) $1604
1926.62 D02 V C
- Issued
- Nov 23, 2016
- Penalty
- Initial $1,604 · Current $1,000 Reduced
1591
General-duty citation text
29 CFR 1926.62(d)(2)(v)(C): Until the employer performed an employee exposure assessment as required under 29 CFR 1926.62(d) and determined actual employee exposure, the employer did not provide to employees performing the tasks described in 29 CFR 1926.62(d)(2)(i), (d)(2)(ii), (d)(2)(iii), and (d)(2)(iv) with change areas in accordance with 29 CFR 1926.62(i)(2): a) At the worksite, Parkway Center Mall, on or about October 26, 2016 - A changing area was not provided for an employee performing torch cutting operations until the employer performed an employee exposure assessment
Recent events (2)
- — I (S) $1000
- — Z (S) $1604
1926.62 D02 V E
- Issued
- Nov 23, 2016
- Penalty
- Initial $1,604 · Current $1,000 Reduced
1591
General-duty citation text
29 CFR 1926.62(d)(2)(v)(E): Until the employer performed an employee exposure assessment as required under 29 CFR 1926.62(d) and determined actual employee exposure, the employer did not provide to employees performing the tasks described in 29 CFR 1926.62(d)(2)(i), (d)(2)(ii), (d)(2)(iii), and (d)(2)(iv) with biological monitoring in accordance with 1926.62(j)(1)(i), to consist of blood sampling and analysis for lead and zinc protoporphyrin levels: a) At the worksite, Parkway Center Mall, on or about October 6, 2016 - An employee was not provided with biological monitoring until the employer performed an employee exposure assessment.
Recent events (2)
- — I (S) $1000
- — Z (S) $1604
More inspections at D & G Steel, INC.
View D & G Steel, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238120)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341867786.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.