Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MAL-BER MANUFACTURING COMPANY

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of MAL-BER MANUFACTURING COMPANY in 2115 BYBERRY RD., HUNTINGDON VALLEY, PA 19006 (NAICS 333514). OSHA activity number 341937498.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mal-Ber Manufacturing Company — free Get an email when a new federal OSHA severe-injury report for Mal-Ber Manufacturing Company is published. One employer, no account, unsubscribe in one click.
Site address
2115 BYBERRY RD.
City
HUNTINGDON VALLEY
State
PA
ZIP
19006
Mailing
2115 BYBERRY RD., HUNTINGDON VALLEY, PA 19006
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333514
Employees
18
Ownership type
A

3 citations on file for this inspection.

1910.95 G05 I

Repeat Gravity 5 3 instances 1 exposed
Issued
Apr 4, 2017
Abate by
Apr 24, 2017
Penalty
Initial $9,560 · Current $6,700 Reduced

Hazardous substances 81108111

29 CFR 1910.95(g)(5)(i): The employer did not establish, within 6 months of an employee's first exposure at or above the action level, a valid baseline audiogram against which subsequent audiograms can be compared:     a.) The Warco 50 ton Power Press -  An employee, who was fabricating Motorcycle packing supports, was exposed to continuous noise at 77.2% of the permissible exposure level of 90 dBA or an eight hour time weighted average (TWA) noise exposure of 88.2 dBA. This exposure was observed occurring over a 404 minute sampling period on December 20, 2016. A zero exposure was assumed for the 76 minutes not sampled.  The employer did not establish a baseline audiogram for the exposed employee.     b.) The Verson Power Press - An employee, who was fabricating parts for office equipment, was exposed to continuous noise at 135.8% of the permissible exposure level of 90 dBA or an eight hour time weighted average (TWA) noise exposure of 92.2 dBA. This exposure was observed occurring over a 351 minute sampling period on February 7, 2017. A zero exposure was assumed for the 129 minutes not sampled.  The employer did not establish a baseline audiogram for the exposed employee.     c.) The Blanchard Grinder - An employee who was grinding parts, was exposed to continuous noise at 99.8% of the permissible exposure level of 90 dBA or an eight hour time weighted average (TWA) noise exposure of 89.9 dBA. This exposure was observed occurring over a 421 minute sampling period on February 7, 2017. A zero exposure was assumed for the 59 minutes not sampled.  The employer did not establish a baseline audiogram for the exposed employee.     The Mal-Ber manufacturing Co. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.95(g)(1), which was contained in OSHA inspection number 1037196, citation number 1, item number 1b and was affirmed as a final order on July 7,2015, with respect to a workplace located at 2115 Byberry Rd., Huntingdon Valley PA, 19006.
Recent events (2)
  • — I (R) $6700
  • — Z (R) $9560

1910.95 K01

Repeat Gravity 5 1 instance 3 exposed
Issued
Apr 4, 2017
Penalty
Initial $0 · Current $0

Hazardous substances 81108111

29 CFR 1910.95(k)(1): The employer did not train each employee who is exposed to noise at or above an 8-hour time-weighted average of 85 decibels in accordance with the requirements of 29 CFR 1910.95(k):  a.) The Warco 50 ton Power Press - An employee, who was fabricating Motorcycle packing supports, was exposed to continuous noise at 77.2% of the permissible exposure level of 90 dBA or an eight hour time weighted average (TWA) noise exposure of 88.2 dBA. This exposure was observed occurring over a 404 minute sampling period on December 20, 2016. A zero exposure was assumed for the 76 minutes not sampled.  The employer did not provide training for employees exposed above the action level.  The Mal-Ber manufacturing Co. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.95(k)(1), which was contained in OSHA inspection number 1037196, citation number 1, item number 1c and was affirmed as a final order on July 7,2015, with respect to a workplace located at 2115 Byberry Rd., Huntingdon Valley PA, 19006.
Recent events (2)
  • — I (R) $0
  • — Z (R) $0

1910.95 K02

Repeat Gravity 5 2 instances 10 exposed
Issued
Apr 4, 2017
Penalty
Initial $0 · Current $0

Hazardous substances 81108111

29 CFR 1910.95(k)(2): The training program was not repeated annually for each employee included in the hearing conservation program:  a.) The Verson Power Press - An employee, who was fabricating parts for office equipment, was exposed to continuous noise at 135.8% of the Permissible exposure level of 90 dBA or an eight hour time weighted average (TWA) noise exposure of 92.2 dBA. This exposure was observed occurring over a 351 minute sampling period on February 7, 2017. A zero exposure was assumed for the 129 minutes not included in the sample.  The employer did not provide annual noise training.  b.) The Blanchard Grinder - An employee who was grinding parts, was exposed to continuous noise at 99.8% of the Permissible exposure level of 90 dBA or an eight hour time weighted average (TWA) noise exposure of 89.9 dBA. This exposure was observed occurring over a 421 minute sampling period on February 7, 2017. A zero exposure was assumed for the 59 minutes not sampled.  The employer did not provide annual noise training.   The Mal-Ber manufacturing Co. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.95(k)(1), which was contained in OSHA inspection number 1037196, citation number 1, item number 1c and was affirmed as a final order on July 7,2015, with respect to a workplace located at 2115 Byberry Rd., Huntingdon Valley PA, 19006.
Recent events (2)
  • — I (R) $0
  • — Z (R) $0

View Mal-Ber Manufacturing Company's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341937498.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.