WILLIAMSTOWN, WV —
OSHA Inspection: CARR CONCRETE A DIVISION OF CXT INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CARR CONCRETE A DIVISION OF CXT INCORPORATED in 362 WAVERLY ROAD, WILLIAMSTOWN, WV 26187 (NAICS 327390). OSHA activity number 341967222.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARR CONCRETE A DIVISION OF CXT INCORPORATED
- Site address
- 362 WAVERLY ROAD
- City
- WILLIAMSTOWN
- State
- WV
- ZIP
- 26187
- Mailing
- PO BOX 265, WAVERLY, WV 26184
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 74
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.23 A08
- Issued
- Jan 9, 2017
- Abate by
- Jan 27, 2017
- Penalty
- Initial $5,345 · Current $3,474 Reduced
General-duty citation text
29 CFR 1910.23(a)(8): Every floor hole into which persons can accidentally walk was not guarded: (a) Building 5: On or about December 7, 2016 and times prior, an employee would pour concrete while standing on the platform of a box culvert form that contained two gaps measuring approximately 4.5 inches wide and 3 feet long with a piece of rebar in between for foot placement.
Recent events (2)
- — I (S) $3474.25
- — Z (S) $5345
1910.24 E
- Issued
- Jan 9, 2017
- Abate by
- Feb 3, 2017
- Penalty
- Initial $5,345 · Current $3,474 Reduced
General-duty citation text
29 CFR 1910.24(e): Fixed stairs were not installed at angles to the horizontal of between 30 deg. and 50 deg. (a) Building 1: On or about December 12, 2016 and times prior, employees accessed a platform to mix concrete using a stairway that was constructed at an angle exceeding 50 degrees.
Recent events (2)
- — I (S) $3474.25
- — Z (S) $5345
1910.24 H
- Issued
- Jan 9, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.24(h): Standard railings were not provided on the open sides of all exposed stairways and stair platforms: (a) Building 1: On or about December 12, 2016 and times prior, employees accessed a platform to mix concrete using a stairway that did not have a midrail installed on the stair railing.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.27 B01 II
- Issued
- Jan 9, 2017
- Abate by
- Jan 27, 2017
- Penalty
- Initial $5,345 · Current $3,474 Reduced
General-duty citation text
29 CFR 1910.27(b)(1)(ii): The distance between rungs, cleats, and steps exceeded 12 inches and were not uniform throughout the length of the ladder. (a) Building 5: On or about December 7, 2016 and times prior, employees would access the working platform by using a fix ladder that had unevenly spaced rungs that were separated by distances that exceeded 12 inches.
Recent events (2)
- — I (O) $3474.25
- — Z (S) $5345
1910.215 B09
- Issued
- Jan 9, 2017
- Penalty
- Initial $5,345 · Current $3,474 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Building 8: On or about September 12, 2016 and times prior, employees operated a DeWalt bench grinder (Model DW 758) that was equipped with a tongue guard that was installed incorrectly leaving an approximately 1/2 inch opening on the left side between the wheel and the peripheral member. (b) Building 8: On or about September 12, 2016 and times prior, employees operated a DeWalt bench grinder (Model DW 758) that was equipped with a tongue guard that was installed incorrectly leaving an approximately 1/2 inch opening on the right side between the wheel and the peripheral member.
Recent events (2)
- — I (O) $3474.25
- — Z (S) $5345
1910.36 G02
- Issued
- Jan 9, 2017
- Abate by
- Jan 20, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.36(g)(2): Exit access(es) was not at least 28 inches (71.1 cm) wide at all points. (a) Building 1: On or about December 12, 2016 and times prior, a door labeled as an exit had access points that were less than 28 inches wide.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G01 IV A
- Issued
- Jan 9, 2017
- Abate by
- Jan 27, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) Building 5: On or about November 28, 2016 and times prior, an extension cord was secured and mounted on the wall and was used to power a Dayton table saw. (b) Building 5: On or about November 28, 2016 and times prior, an extension cord was secured and mounted on the wall and was used to power a DeWalt miter saw.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Carr Concrete a Division of CXT Incorporated
View Carr Concrete a Division of CXT Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 327390)
More inspections in WV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341967222.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.