SANFORD, FL —
OSHA Inspection: RCK LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of RCK LLC in 2647 N. DESIGN COURT, SANFORD, FL 32773 (NAICS 334510). OSHA activity number 341983724.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RCK LLC
- Site address
- 2647 N. DESIGN COURT
- City
- SANFORD
- State
- FL
- ZIP
- 32773
- Mailing
- 2647 N. DESIGN COURT, SANFORD, FL 32773
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334510
- Employees
- 24
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A02
- Issued
- May 5, 2017
- Abate by
- Jun 1, 2017
- Penalty
- Initial $5,070 · Current $5,070
General-duty citation text
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible: a) In the manufacturing area, employees were exposed to amputation hazards, in that, the Easy Load Solder Change Over Machine hood for the RPS Rhythm Slide Selective Soldering System was not affixed to the machine. This violation was observed on or about December 15, 2016.
Recent events (1)
- — Z (S) $5070
1910.305 D02
- Issued
- May 5, 2017
- Penalty
- Initial $3,622 · Current $3,622
General-duty citation text
29 CFR 1910.305(d)(2): Panelboards were not mounted in cabinets, cutout boxes, or enclosures designed for the purpose and/or were not dead front: a) In the manufacturing area by the bathrooms, employees were exposed to electrical hazards from the dead front and trim of the breaker box that was removed. This violation was observed on or about December 15, 2016.
Recent events (1)
- — Z (S) $3622
1910.1025 D02
- Issued
- May 5, 2017
- Abate by
- Jun 1, 2017
- Penalty
- Initial $3,622 · Current $3,622
General-duty citation text
29 CFR 1910.1025(d)(2): An initial determination was not made to determine if any employee may be exposed to lead at or above the action level: a) In the manufacturing area, the employer did not do an initial determination to determine if any employee may be exposed to lead. This violation was discovered on or about December 15, 2016.
Recent events (1)
- — Z (S) $3622
1910.1025 H01
- Issued
- May 5, 2017
- Abate by
- Jun 22, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations of lead: a) On the MPM Momentum handle, 390.2um (micrograms) of lead was found. This violation was discovered on or about December 15, 2016. b) On the Board Load Hood handle of the RPS Rhythm Slide Selective Soldering System, 170.00um (micrograms) of lead was found. This violation was discovered on or about December 15, 2016. c) On the Right desk/table by the RPS Rhythm Slide Selective Soldering System, 130.00um (micrograms) of lead was found. This violation was discovered on or about December 15, 2016. d) On the mouse connected to the RPS Rhythm Slide Selective Soldering System, 97.05um (micrograms) of lead was found. This violation was discovered on or about December 15, 2016. e) On the Table surface by the SMT machine, 60.9um (micrograms) of lead was found. This violation was discovered on or about December 15, 2016. f) On the Left desk/table by the RPS Rhythm Slide Selective Soldering System, 36.355um (micrograms) of lead was found. This violation was discovered on or about December 15, 2016. g) On the start button connected to the RPS Rhythm Slide Selective Soldering System, 19.095um (micrograms) of lead was found. This violation was discovered on or about December 15, 2016. h) On the table in the eating area, 4.1645um (micrograms) of lead was found. This violation was discovered on or about December 15, 2016. i) On the Refrigerator handle, 1.255um (micrograms) of lead was found. This violation was discovered on or about December 15, 2016.
Recent events (1)
- — Z (S) $0
1910.1025 M01 I
- Issued
- May 5, 2017
- Abate by
- Jun 1, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1025(m)(1)(i): The employer did not comply with all the requirements of the Hazard Communication Standard for lead: a) In the workplace, the employer did not have a Hazard Communication Program. This violation was discovered on or about December 15, 2016.
Recent events (1)
- — Z (S) $0
1910.1025 L01 II
- Issued
- May 5, 2017
- Abate by
- Jun 1, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1025(l)(1)(ii): The employer did not train each employee who is subject to exposure to lead at or above the action level, or for whom the possibility of skin or eye irritation exists, in accordance with the requirements of 29 CFR 1910.1025: a) In the workplace, employees were not provided with training regarding the lead in their work area. This violation was discovered on or about December 15, 2016.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 334510)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341983724.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.