BRIDGEVILLE, PA —
OSHA Inspection: PHILLIPS CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PHILLIPS CORPORATION in 1889 MAYVIEW ROAD, BRIDGEVILLE, PA 15017 (NAICS 423830). OSHA activity number 341996841.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PHILLIPS CORPORATION
- Site address
- 1889 MAYVIEW ROAD
- City
- BRIDGEVILLE
- State
- PA
- ZIP
- 15017
- Mailing
- 1889 MAYVIEW ROAD, BRIDGEVILLE, PA 15017
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423830
- Employees
- 99
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.179 J03
- Issued
- Feb 22, 2017
- Abate by
- Mar 20, 2017
- Penalty
- Initial $7,605 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months: a) Jobsite, Main Bay, 1889 Mayview Road, Bridgeville, PA 15017: On or about December 27, 2016, crane inspection documents maintained by the employer show that a complete periodic inspection of the Wright 10 ton overhead crane (type/model TRDG, serial number L32170) had not been conducted within the past 12 months. The crane was used by employees on a daily basis to lift powered industrial trucks of varying weights.
Recent events (3)
- — F (S) $7000
- — C (S) $7605
- — Z (S) $7605
1910.179 J02 III
- Issued
- Feb 22, 2017
- Abate by
- Mar 20, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with signed reports, were not performed: a) Jobsite, Main Bay, 1889 Mayview Road, Bridgeville, PA 15017: On or before December 27, 2016, crane inspection documents maintained by the employer show that monthly inspections of hooks with signed reports for were not performed for a Wright 10 ton overhead crane (type/model TRDG, serial number L32170). The crane was used by employees on a daily basis to lift powered industrial trucks of varying weights.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.179 M01
- Issued
- Feb 22, 2017
- Abate by
- Mar 20, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(m)(1): Thorough monthly inspections of rope conditions, with written, dated and signed reports, were not performed on the running ropes: a) Jobsite, Main Bay, 1889 Mayview Road, Bridgeville, PA 15017: On or before December 27, 2016, crane inspection documents maintained by the employer show that monthly wire rope inspections for the Wright 10 ton overhead crane (model/type TRDG, serial number L32170) with written, dated, and signed reports were not performed. The crane is used by employees on a daily basis to lift powered industrial trucks of varying weights.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.184 C13
- Issued
- Feb 22, 2017
- Abate by
- Mar 6, 2017
- Penalty
- Initial $7,605 · Current $0 Reduced
General-duty citation text
29 CFR 1910.184(c)(13): A sling was loaded in excess of its recommended safe working load as prescribed by the sling manufacturer: a) Jobsite, Bay One, 1889 Mayview Road, Bridgeville, PA 15017: On or about August 26, 2016, an alloy chain sling (3/8", X 14'1", type TOG, GR80) was used to lift loads in excess of its recommended safe working load. The alloy chain sling was used to lift the back end of a Hoist brand powered industrial truck (model number FKS15X, serial number 21347) that weighed approximately 37,000 pounds. The alloy chain sling would have been overloaded in any configuration listed on the certificate of test sheet provided by the sling manufacturer. Employees were exposed to crushed-by and struck-by hazards while using the alloy chain sling to lift the back end of the Hoist truck. b) Jobsite, Bay One, 1889 Mayview Road, Bridgeville, PA 15017: On or about January 6, 2017, an alloy chain sling (3/8", X 14'1", type TOG, GR80) was used to lift loads in excess of its recommended safe working load. The alloy chain sling was used to lift the back end of a Hyster brand powered industrial truck (model number H155FT, serial number K006V02985N) that weighed approximately 21,580 pounds. The back end of the truck was lifted with the alloy chain sling using a single leg configuration. This configuration would have provided a working load limit of approximately 7,100 pounds. Employees were exposed to crushed-by and struck-by hazards while using the alloy chain sling to lift the back end of the Hyster H155FT truck. c) Jobsite, Bay One, 1889 Mayview Road, Bridgeville, PA 15017: On or about January 4, 2017, an alloy chain sling (3/8", X 14'1", type TOG, GR80) was used to lift loads in excess of its recommended safe working load. The alloy chain sling was used to lift a Hyster brand powered industrial truck (model number HJ120FT, model number S005V01763L) that weighed approximately 17810 pounds. The back end of the truck was lifted with the alloy chain sling using a single leg configuration. This configuration would have provided a working load limit of approximately 7,100 pounds. Employees were exposed to crushed-by and struck-by hazards while using the alloy chain sling to lift the back end of the Hyster HJ120FT truck.
Recent events (3)
- — F (O) $0
- — C (S) $7605
- — Z (S) $7605
More inspections at Phillips Corporation
View Phillips Corporation's full OSHA safety record →
More inspections in this industry (NAICS 423830)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341996841.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.