Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ARTISAN DISPLAY, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ARTISAN DISPLAY, INC. in 1239 E. SIXTH ST., RED HILL, PA 18076 (NAICS 333243). OSHA activity number 341998912.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Artisan Display, INC. — free Get an email when a new federal OSHA severe-injury report for Artisan Display, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1239 E. SIXTH ST.
City
RED HILL
State
PA
ZIP
18076
Mailing
1239 E. SIXTH STREET, RED HILL, PA 18076
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333243
Employees
85
Ownership type
A

5 citations on file for this inspection.

1910.22 A01

Serious Gravity 5 1 instance 40 exposed
Issued
Feb 15, 2017
Penalty
Initial $5,387 · Current $5,387
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.    a) Cutting Room - on or about December 28, 2016, the area where wood cutting was performed had explosive wood dust accumulated on the vents in the ceiling area.
Recent events (2)
  • — I (S) $5387
  • — Z (S) $5387

1910.307 C02 I

Serious Gravity 5 1 instance 40 exposed
Issued
Feb 15, 2017
Abate by
Feb 28, 2017
Penalty
Initial $5,387 · Current $0 Reduced
29 CFR 1910.307(c)(2)(i): Equipment was not approved for the class of location and for the ignitable or combustible properties of the specific gas, vapor, dust, or fiber that would be present.    a) Cutting Room - on or about December 28, 2016, employees were using an electric shop vacuum that was not approved for hazardous locations to clean up Class II combustible dust.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5387

1910.213 C01

Serious Gravity 5 1 instance 40 exposed
Issued
Feb 15, 2017
Abate by
Feb 28, 2017
Penalty
Initial $4,310 · Current $2,155 Reduced
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:    a) General Assembly Room - on or about December 28, 2016, employees operated a Delta 10 inch tilting arbor saw which did not have its blade guarded by an automatically adjusting hood.
Recent events (2)
  • — I (S) $2155
  • — Z (S) $4310

1910.1200 E01

Serious Gravity 5 1 instance 40 exposed
Issued
Feb 15, 2017
Abate by
Feb 28, 2017
Penalty
Initial $4,310 · Current $2,155 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    a) Artisan Display, Inc.- on or about December 28, 2016, employees were manufacturing custom wood products with the use of hazardous chemicals to include but not limited to; lacquer, ethanol, mineral spirits, solvents, plywood, particle board, and thermo-fused melamine panel, but the employer had not developed and implemented a written hazard communication program.
Recent events (2)
  • — I (S) $2155
  • — Z (S) $4310

1910.1200 H01

Serious Gravity 5 1 instance 40 exposed
Issued
Feb 15, 2017
Abate by
Feb 28, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) Artisan Display, Inc. - on or about December 28, 2016, employees were manufacturing custom wood products with the use of hazardous chemicals to include but not limited to; lacquer, ethanol, mineral spirits, solvents, plywood, particle board, and thermo-fused melamine panel, but the employees had not been provided effective information and training on the chemicals as required.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Artisan Display, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341998912.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.