OSHA Inspection: JDCI ENTERPRISES, INC

Issued

May 23, 2017

Penalty

Initial $3,694 · Current $1,847 Reduced

General-duty citation text

29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:       a. In the production area employees are exposed to amputaion hazard, a Rockwell table saw, model 12/14 was used with a missing guard, while cutting lumber, on or about, 01/11/2017.

Issued

May 23, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:   a. In the production area employees are exposed to amputaion hazard associated with the use of a, Rockwell model 12/14, table saw, with a missing spreader, while cutting lumber, on or about, 01/11/2017.

Issued

May 23, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:   a. In the production area employees are exposed to the hazards associated with the use of a, Rockwell model 12/14, table saw, with a missing non-kickback system, while cutting lumber, on or about, 01/11/2017.

Issued

May 23, 2017

Abate by

Jul 11, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):   a. In the establishment production area where employees are exposed to foot injuries while handling heavy materials such as, but not limited to, I-beams, wheel rims and trailer axels.  No assessment had been conducted, on or about, 01/11/2017.

Issued

May 23, 2017

Abate by

Jul 11, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.136(a): The employer did not ensure that each affected employee used protective footwear when working in areas where there was a danger of foot injuries due to falling or rolling objects, or objects piercing the sole, and where such employee's feet were exposed to electrical hazards:  a. In the establishment production area where employees are exposed to foot injuries while handling heavy materials such as, but not limited to, I-beams, wheel rims and trailer axels. Foot protection was not been worn by employees, on or about, 01/11/2017.