HILLSIDE, IL —
OSHA Inspection: DARWILL, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DARWILL, INC. in 11900 W. ROOSEVELT RD., HILLSIDE, IL 60162 (NAICS 323111). OSHA activity number 342048659.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DARWILL, INC.
- Site address
- 11900 W. ROOSEVELT RD.
- City
- HILLSIDE
- State
- IL
- ZIP
- 60162
- Mailing
- 11900 W. ROOSEVELT RD., HILLSIDE, IL 60162
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 100
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.151 C
- Issued
- Feb 6, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $4,889 · Current $2,690 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) On or about January 23, 2017, Darwill, Inc. did not provide an eyewash station on the first floor near the battery charging area for immediate emergency use. In accordance with 29CFR 1903.19(d), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $2690
- — Z (S) $4889
1910.178 L01 I
- Issued
- Feb 6, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $8,149 · Current $4,455 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) On or about January 24, 2017, Darwill, Inc. failed to ensure that all powered industrial truck operators, including temporary employees, were successfully trained, evaluated, and certified. In accordance with 29CFR 1903.19(d), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $4455
- — Z (S) $8149
1910.178 P01
- Issued
- Feb 6, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $8,149 · Current $4,455 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s). a) On or about January 19, 2017, Darwill, Inc. did not take the Hyster sit down forklift truck (s/n H160N03085Z) out of service when it was found to lose power and/or shut-off when making sharp turns until it was restored to a safe operating condition. In accordance with 29CFR 1903.19(d), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $4455
- — Z (S) $8149
1910.178 Q07
- Issued
- Feb 6, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily. a) On or about January 24, 2017, Darwill, Inc. did not ensure that the Hyster sit down forklift truck (s/n H160N03085Z) was examined before being operated for conditions which could adversely affect the safety of the vehicle. In accordance with 29CFR 1903.19(d), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Darwill, INC.
View Darwill, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323111)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342048659.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.