PLAINVILLE, GA —
OSHA Inspection: ATCO RUBBER PRODUCTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ATCO RUBBER PRODUCTS, INC. in 185 COUNTY LINE ROAD, PLAINVILLE, GA 30733 (NAICS 332322). OSHA activity number 342071685.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATCO RUBBER PRODUCTS, INC.
- Site address
- 185 COUNTY LINE ROAD
- City
- PLAINVILLE
- State
- GA
- ZIP
- 30733
- Mailing
- 185 COUNTY LINE ROAD, PLAINVILLE, GA 30733
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 500
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Jul 20, 2017
- Penalty
- Initial $9,054 · Current $5,432 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Ram Packer, Line 1: On or about May 24, 2017, and at times prior, the employer exposed employees to caught-in/amputation hazards, in that inward running nip points between wheels and track of the puller were not guarded to protect from inadvertent contact with the wheels.
Recent events (2)
- — I (S) $5432.4
- — Z (S) $9054
1910.132 D02
- Issued
- Jul 20, 2017
- Abate by
- Aug 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment. a) Ram Packer, line 1: On or about May 24, 2017, and at times prior, the employer exposed employees to various physical and health hazards, in that a written personal protective equipment (PPE) assessment was not performed for employees working around vehicles and equipment to include, but is not limited to: forklifts; moving ram packing machinery; and nuisance dust from insulation.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 K
- Issued
- Jul 20, 2017
- Abate by
- Aug 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k): Training and information. This paragraph requires the employer to provide effective training to employees who are required to use respirators. The training must be comprehensive, understandable, and recur annually, and more often if necessary. This paragraph also requires the employer to provide the basic information on respirators in Appendix D of this section to employees who wear respirators when not required by this section or by the employer to do so. a) Production floor: On or about May 24, 2017, and at times prior, the employer exposed employees to respiratory hazards, in that the information in Appendix D of the Respiratory Protection Standard was not provided to employees while using respirators for nuisance dust voluntarily.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 B07 I
- Issued
- Jul 20, 2017
- Abate by
- Aug 1, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings shall be effectively closed to afford protection substantially equivalent to the wall of the equipment. a) Ram Packer, line 1: On or about May 24, 2017, and at times prior, the employer exposed employees to electrical shock hazards, in that a knockout missing on the e-stop control junction box of the packing machine within the employee's work station.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Atco Rubber Products, INC.
View Atco Rubber Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342071685.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.