Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: THE BUTLER WELDMENTS CORPORATION

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of THE BUTLER WELDMENTS CORPORATION in 1200 INDUSTRIAL BLVD., CAMERON, TX 76520 (NAICS 332312). OSHA activity number 342075421.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch The Butler Weldments Corporation — free Get an email when a new federal OSHA severe-injury report for The Butler Weldments Corporation is published. One employer, no account, unsubscribe in one click.
Site address
1200 INDUSTRIAL BLVD.
City
CAMERON
State
TX
ZIP
76520
Mailing
1200 INDUSTRIAL BLVD., CAMERON, TX 76520
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
60
Ownership type
A

4 citations on file for this inspection.

1910.179 N03 I

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Feb 27, 2017
Abate by
Mar 3, 2017
Penalty
Initial $6,338 · Current $0 Reduced
29 CFR 1910.179(n)(3)(i): The load was not well secured and properly balanced in the sling or lifting device before it is lifted more than a few inches.  On or about January 31, 2017, and in times prior thereto, a round piece of metal over 7 feet in diameter was being lifted with a two part sling using hooks depending on friction alone to be held in place. Employees were exposed to the hazards of being struck by the load in the event of an unbalance load and hooks slipping out.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6338

1910.184 C06

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Feb 27, 2017
Abate by
Mar 3, 2017
Penalty
Initial $6,338 · Current $0 Reduced
29 CFR 1910.184(c)(6): Slings were not securely attached to their loads.  On or about January 31, 2017, and in times prior thereto, a round piece of metal over 7 feet in diameter was being lifted with a two part sling using hooks and a flat metal bar that depended on friction alone to be held in place. Employees were exposed to the hazards of being struck by the load in the event of the hooks and metal bar slipping out.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6338

1910.184 C09

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 27, 2017
Abate by
Mar 3, 2017
Penalty
Initial $6,338 · Current $10,000
29 CFR 1910.184(c)(9): Employee(s) were not kept clear of load(s) suspended, or about to be lifted by slings:    On or about January 31, 2017, and in times prior thereto, a round piece of metal over 7 feet in diameter was being lifted in a two part sling to be inspected on the bottom and side for defects in the paint. Workers who were reaching under the load were exposed to being struck by the load in the event it became unbalanced.
Recent events (2)
  • — I (S) $10000
  • — Z (S) $6338

1910.184 E02 II

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 27, 2017
Abate by
Mar 3, 2017
Penalty
Initial $8,873 · Current $0 Reduced
29 CFR 1910.184(e)(2)(ii): Makeshift links or fasteners formed from bolts or rods, or other such attachments, were used.    On or about January 31, 2017, and in times prior thereto, a round piece of metal over 7 feet in diameter and weighing 4252 pounds was being lifted with a two part sling using metal bars that were shop made from plate steel to fasten the load to the chain sling. Workers who were reaching under the load were exposed to the hazard of being struck by the load in the event it became unbalanced.
Recent events (2)
  • — I (S) $0
  • — Z (S) $8873

View The Butler Weldments Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342075421.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.