CORPUS CHRISTI, TX —
OSHA Inspection: SECHRIST-HALL COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SECHRIST-HALL COMPANY in 102 OMAHA DR, CORPUS CHRISTI, TX 78408 (NAICS 332322). OSHA activity number 342129988.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SECHRIST-HALL COMPANY
- Site address
- 102 OMAHA DR
- City
- CORPUS CHRISTI
- State
- TX
- ZIP
- 78408
- Mailing
- P.O. BOX 5207, CORPUS CHRISTI, TX 78465
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 56
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.217 C01 I
- Issued
- May 18, 2017
- Abate by
- Jun 14, 2017
- Penalty
- Initial $8,873 · Current $4,436 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es). At this work place, employees utilized the GEKA 11H press for fabrication operations and the point of operation was not guarded to prevent the employees' body parts from accessing the danger zone.
Recent events (2)
- — I (S) $4436
- — Z (S) $8873
1910.217 C03 IV D
- Issued
- May 18, 2017
- Abate by
- Jun 14, 2017
- Penalty
- Initial $8,873 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(c)(3)(iv)(d): Records of inspection and maintenance of pullout devices on mechanical power press(es) were not kept in accordance with 29 CFR 1910.217(e). At this work place, employees conducted press break fabrication operations and the safety pullout device inspections and maintenance records were not kept to ensure proper fit and prevent employees from accessing the point of operation while the presses were cycling.
Recent events (2)
- — I (O) $0
- — Z (S) $8873
1910.217 D09 I
- Issued
- May 18, 2017
- Abate by
- Jun 14, 2017
- Penalty
- Initial $8,873 · Current $4,436 Reduced
General-duty citation text
29 CFR 1910.217(d)(9)(i): The employer did not establish a die setting procedure for mechanical power press(es) that would ensure compliance with 29 CFR 1910.217(b)(c)(a). At this work place, employees conducted die setting operations on the GEKA PM-030 (42547) press and a die setting procedure was not developed and implemented to protect employees from the unguarded point of operation.
Recent events (2)
- — I (S) $4436
- — Z (S) $8873
1910.217 D09 IV
- Issued
- May 18, 2017
- Abate by
- Jun 14, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(d)(9)(iv): Safety blocks were not used when mechanical power press die(s) were being adjusted or repaired in the press. At this work place, employees conducted die setting operations on the GEKA PM-030 (42547) press and a die safety block or other acceptable means of protection was not utilize to protected employees from the unguarded point of operation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 E01 I
- Issued
- May 18, 2017
- Abate by
- Jun 14, 2017
- Penalty
- Initial $8,873 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(e)(1)(i): The employer did not maintain a certification record of inspections which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the power press that was inspected. At this work place, employees conducted press brake fabrication operations and the inspection records of the power presses were not kept to ensure safe power press operation.
Recent events (2)
- — I (O) $0
- — Z (S) $8873
1910.141 A03 I
- Issued
- May 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.141(a)(3)(i): Places of employment were not kept clean to the extent that the nature of the work allowed. At this work place, employees conducted fabrication operations and the shop area had items such as but not limited to: metal material, equipment and miscellaneous items in need of organization.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Sechrist-Hall Company
View Sechrist-Hall Company's full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342129988.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.