Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: R & M METALS, INC.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of R & M METALS, INC. in 10726 STEEL DRIVE, HENNEPIN, IL 61327 (NAICS 238910). OSHA activity number 342145653.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch R & M Metals, INC. for free Get an email when a new federal OSHA severe-injury report for R & M Metals, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
R & M METALS, INC.
Site address
10726 STEEL DRIVE
City
HENNEPIN
State
IL
ZIP
61327
Mailing
212 N. EVANS ROAD, EVANSDALE, IA 50707
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238910
Employees
6
Ownership type
Private (A)

3 citations on file for this inspection.

1926.56 A

Other-than-serious 1 instance 3 exposed
Issued
May 19, 2017
Abate by
Jul 11, 2017
Penalty
Initial $3,259 · Current $3,259
29 CFR 1926.56(a): General. Construction areas, ramps, runways, corridors, offices, shops, and storage areas shall be lighted to not less than the minimum illumination intensities listed in Table D-3 while any work is in progress:    On or about 2/19/2017, the employer did not ensure that the lighting for employees performing work in construction areas met the minimum illumination intensity of 5 foot-candles. Employees performing material salvage work at the Tandem Mill, Bay 103 South End worked in areas where the illumination intensity was measured to be between 0.2 and 2.4 foot-candles, exposing employees to trip and fall hazards.     Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • · I (O) $3259
  • · Z (S) $3259

1926.501 B04 II

Other-than-serious 1 instance 3 exposed
Issued
May 19, 2017
Abate by
Jul 11, 2017
Penalty
Initial $2,173 · Current $2,173
29 CFR 1926.501(b)(4)(ii): Each employee on a walking/working surface was not protected from tripping in or stepping into or through holes by covers.    On or about 2/19/2017, the employer did not ensure that employees performing work in construction areas were not exposed to trip hazards while performing work activities. Workers were exposed to uncovered floor holes at the Tandem Mill, Bay 103 South End that measured 6 to 8 inches in depth.     Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • · I (O) $2173
  • · Z (S) $2173

1904.39 A02

Other-than-serious 1 instance 1 exposed
Issued
May 19, 2017
Abate by
Jul 11, 2017
Penalty
Initial $2,716 · Current $2,716
29 CFR 1904.39(a)(2):  Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.  On or about 02/19/2017, the employer failed to report an in-patient hospitalization to OSHA within twenty-four (24) hours. The employer did not notify OSHA that an employee was hospitalized after experiencing a fall of 9 feet in the Tandem Mill, Bay 103 South End work area.  Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • · I (O) $2716
  • · Z (O) $2716

View R & M Metals, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342145653.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.