Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PEAK CUSTOM FABRICATION, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of PEAK CUSTOM FABRICATION, INC. in 155 SUTTON LANE, COLORADO SPRINGS, CO 80907 (NAICS 332322). OSHA activity number 342159357.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Peak Custom Fabrication, INC. — free Get an email when a new federal OSHA severe-injury report for Peak Custom Fabrication, INC. is published. One employer, no account, unsubscribe in one click.
Site address
155 SUTTON LANE
City
COLORADO SPRINGS
State
CO
ZIP
80907
Mailing
155 SUTTON LANE, COLORADO SPRINGS, CO 80907
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332322
Employees
18
Ownership type
A

4 citations on file for this inspection.

1910.134 C

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 20, 2017
Abate by
Aug 15, 2017
Penalty
Initial $2,173 · Current $1,087 Reduced
29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use:    a)   On or about March 3, 2017, the employer, Peak Custom Fabrication, Inc., did not develop and implement a written respiratory protection program for employees required to utilize 3M cartridge-type respirators while engaged in chemical spraying operations.
Recent events (2)
  • — I (S) $1086.5
  • — Z (S) $2173

1910.1200 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 20, 2017
Abate by
Aug 15, 2017
Penalty
Initial $2,173 · Current $1,087 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    a)     On or about March 3, 2017, and at times prior, the employer, Peak Custom Fabrication, Inc., had not developed and implemented a written hazard communication program to protect employees who are required to use hazardous chemicals including, but not limited to, toluene and xylene.       Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $1086.5
  • — Z (S) $2173

1910.179 J03

Other-than-serious 1 instance 4 exposed
Issued
Jul 20, 2017
Abate by
Aug 15, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.179(j)(3): Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section:  a)     On or about March 3, 2017, the employer, Peak Custom Fabrication, Inc., did not ensure complete inspections of on-site overhead crane systems were performed on an annual basis.  Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1026 D01

Other-than-serious 1 instance 2 exposed
Issued
Jul 20, 2017
Abate by
Dec 4, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI):  a)   On or about March 3, 2017, and at times prior, the employer, Peak Custom Fabrication, Inc., did not determine the 8-hour time weighted average exposure to hexavalent chromium for employees required to weld stainless steel components.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Peak Custom Fabrication, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342159357.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.