Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: F&M PLASTICS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of F&M PLASTICS, INC. in 503 SIMMON DRIVE, OSCEOLA, WI 54020 (NAICS 326199). OSHA activity number 342187556.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch F&M Plastics, INC. — free Get an email when a new federal OSHA severe-injury report for F&M Plastics, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
F&M PLASTICS, INC.
Site address
503 SIMMON DRIVE
City
OSCEOLA
State
WI
ZIP
54020
Mailing
503 SIMMON DRIVE, OSCEOLA, WI 54020
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326199
Employees
90
Ownership type
A

5 citations on file for this inspection.

1910.22 A03

Serious Gravity 1 1 instance 4 exposed
Issued
Jun 9, 2017
Penalty
Initial $3,802 · Current $2,281 Reduced
29 CFR 1910.22(a)(3): Walking-working surfaces were not maintained free of hazards:     (a) Area near curing oven #5; Electrical cords were stacked in a manner as to prevent slip resistant mats from making contact with the floor surface creating a slip hazard.
Recent events (2)
  • — I (S) $2281
  • — Z (S) $3802

1910.147 C01

Serious Gravity 10 1 instance 90 exposed
Issued
Jun 9, 2017
Abate by
Jul 31, 2017
Penalty
Initial $8,873 · Current $5,323 Reduced
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    (a) Throughout the facility; The employer did not establish a hazardous energy control program for employees.
Recent events (2)
  • — I (S) $5323
  • — Z (S) $8873

1910.147 D03

Serious Gravity 10 1 instance 90 exposed
Issued
Jun 9, 2017
Abate by
Jul 31, 2017
Penalty
Initial $8,873 · Current $5,323 Reduced
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment was not physically located and operated in such a manner as to isolate the machine or equipment from the energy source:    (a) Throughout the facility; Energy isolation devices were not being adequately utilized to isolate hazardous energy during cleaning, set-up and maintenance activities.
Recent events (2)
  • — I (S) $5323
  • — Z (S) $8873

1910.147 D04 I

Serious Gravity 10 1 instance 90 exposed
Issued
Jun 9, 2017
Abate by
Jul 31, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:  (a) Throughout the facility; The employer did not ensure lockout or tagout devices were affixed to isolate hazardous energy sources during cleaning, set-up and maintenance activities.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Serious Gravity 10 1 instance 90 exposed
Issued
Jun 9, 2017
Abate by
Sep 1, 2017
Penalty
Initial $8,873 · Current $5,323 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards:    (a) Curing ovens in main production area; The doors on the curing ovens are not guarded to prevent employees from being caught in during operation.
Recent events (2)
  • — I (S) $5323
  • — Z (S) $8873

View F&M Plastics, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342187556.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.