Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: EDWARDS EQUIPMENT SALES, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of EDWARDS EQUIPMENT SALES, INC. in 321 CITATION COURT WEST, BIRMINGHAM, AL 35211 (NAICS 332999). OSHA activity number 342190881.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Edwards Equipment Sales, INC. — free Get an email when a new federal OSHA severe-injury report for Edwards Equipment Sales, INC. is published. One employer, no account, unsubscribe in one click.
Site address
321 CITATION COURT WEST
City
BIRMINGHAM
State
AL
ZIP
35211
Mailing
321 CITATION COURT WEST, BIRMINGHAM, AL 35211
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
37
Ownership type
A

5 citations on file for this inspection.

1910.107 B05 I

Serious Gravity 5 1 instance 6 exposed
Issued
Jun 30, 2017
Abate by
Oct 23, 2017
Penalty
Initial $6,464 · Current $3,878 Reduced

Hazardous substances 9135

29 CFR 1910.107(b)(5)(i): There were no visible gauges, audible alarms or pressure activated devices installed in paint spray booths to indicate or ensure that the required air speed was maintained:  a)  On or about 3/22/17 - Electrostatic Spray Line, employees were utilizing a spray booth while conducting electrostatic powder coating that was not equipped with a device to ensure the proper air flow was maintained.
Recent events (2)
  • — I (S) $3878.4
  • — Z (S) $6464

1910.107 H09 I

Serious Gravity 5 1 instance 5 exposed
Issued
Jun 30, 2017
Abate by
Oct 23, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.107(h)(9)(i): Stoppage of ventilating fans or failure of ventilating equipment from any cause:   a)  On or about 3/22/17 - Electrostatic Spray Line, employees were performing powder spray coating without any automatic controls to signal the operator that ventilation has stopped or failed and to disconnect the power supply.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.107 L02 I

Serious Gravity 5 1 instance 4 exposed
Issued
Jun 30, 2017
Abate by
Oct 23, 2017
Penalty
Initial $0 · Current $0

Hazardous substances 9135

29 CFR 1910.107(l)(2)(i): All non-deposited air-suspended powder was not safely removed via exhaust ducts to the powder recovery cyclone or receptacle:  a)  On or about 3/22/17 - Electrostatic Spray Line, employees conducted the hand application of powder coatings in a spray booth that was not equipped with a powder recovery system.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 C01

Other-than-serious 1 instance 5 exposed
Issued
Jun 30, 2017
Abate by
Aug 17, 2017
Penalty
Initial $605 · Current $363 Reduced

Hazardous substances 9135

29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  a)  On or about 3/22/17 - Powder Coat area, employee(s) were provided and required to use a 3M 5101 half-mask cartridge respirator during electrostatic powder coating. A respiratory protection program including medical evaluation, FIT testing, and cleaning and storage of respirators had not been implemented.
Recent events (2)
  • — I (O) $363
  • — Z (O) $605

1910.1200 E01

Other-than-serious 1 instance 10 exposed
Issued
Jun 30, 2017
Abate by
Aug 17, 2017
Penalty
Initial $605 · Current $363 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a)  On or about 3/22/17 - At the facility, a written hazard communication program had not been developed at the site for employees exposed to powder coatings, steel, and welding wire.
Recent events (2)
  • — I (O) $363
  • — Z (O) $605

View Edwards Equipment Sales, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342190881.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.