AUBURN, NY ·
OSHA Inspection: WEAVER MACHINE & TOOL, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WEAVER MACHINE & TOOL, INC. in 44 YORK STREET, AUBURN, NY 13021 (NAICS 332710). OSHA activity number 342213014.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WEAVER MACHINE & TOOL, INC.
- Site address
- 44 YORK STREET
- City
- AUBURN
- State
- NY
- ZIP
- 13021
- Mailing
- 44 YORK STREET, AUBURN, NY 13021
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 17
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.157 G02
- Issued
- Apr 6, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $2,173 · Current $500 Reduced
General-duty citation text
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a) Weaver Machine & Tool, Inc., on or about 3/30/17: The Employer did not provide fire extinguisher training to all employees upon initial employment at least annually thereafter. *ABATEMENT NOTE: By this date the employer must either correct the alleged violation or implement a Fire Safety Policy; as outlined in 29 CFR 1910.38(a) and .39(a) which includes the evacuation requirements of 29 CFR 1910.157(b).
Recent events (3)
- · F (S) $500
- · C (S) $2173
- · Z (S) $2173
1910.1200 E01
- Issued
- Apr 6, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $2,173 · Current $500 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) Weaver Machine & Tool, Inc., on or about 3/30/17: The employer had not developed or implemented a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met.
Recent events (3)
- · F (S) $500
- · C (S) $2173
- · Z (S) $2173
1910.1200 H01
- Issued
- Apr 6, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Weaver Machine & Tool, Inc., on or about 3/30/17: The employer did not provide information and training on the hazardous chemicals being used in the work place. Hazardous chemicals used include but are not limited to: Noco Cut SH2 Metalworking Cutting Fluid, Klean-strip Acetone, Ionoplus 3000-US Dielectric Fluid and compressed gases.
Recent events (3)
- · F (S) $0
- · C (S) $0
- · Z (S) $0
1904.32 A
- Issued
- Apr 6, 2017
- Abate by
- Apr 17, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.32(a): The employer did not ensure that at the end of the year an annual summary of injuries and illnesses on the OSHA 300 Log was created, certified and posted. a) Weaver Machine & Tool, Inc., on or about 3/30/17: The employer did not create, certify and post the OSHA 300A summary of injuries and illnesses for calendar year 2016
Recent events (3)
- · F (O) $0
- · C (O) $0
- · Z (O) $0
1910.178 L04 III
- Issued
- Apr 6, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years: a) Weaver Machine & Tool, Inc., on or about 3/30/17: The Employer did not provide a performance evaluation of each powered industrial truck operator at least every three years.
Recent events (3)
- · F (O) $0
- · C (O) $0
- · Z (O) $0
More inspections at Weaver Machine & Tool, INC.
View Weaver Machine & Tool, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342213014.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.