Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GCB REMODELING, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of GCB REMODELING, LLC in 95 SCHOOL STREET, LINCOLN, RI 02865 (NAICS 238160). OSHA activity number 342220233.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch GCB Remodeling, LLC — free Get an email when a new federal OSHA severe-injury report for GCB Remodeling, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
GCB REMODELING, LLC
Site address
95 SCHOOL STREET
City
LINCOLN
State
RI
ZIP
02865
Mailing
12 PALM STREET P.O. BOX 9091, NORTH PROVIDENCE, RI 02904
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
9
Ownership type
A

7 citations on file for this inspection.

1926.405 A02 II I

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 24, 2017
Penalty
Initial $2,988 · Current $2,988
29 CFR 1926.405(a)(2)(ii)(I): Protection was not provided to avoid damage to flexible cords and cables used for temporary wiring which passed through doorways or other pinch points:   (a) Worksite:  On or about 4/3/2017, the employer did not ensure that an extension cord which passed through a doorway was protected from damage, while used to power a circular saw on the roof level.
Recent events (1)
  • — Z (S) $2988

1926.1053 B01

Serious Gravity 5 2 instances 4 exposed
Issued
Apr 24, 2017
Penalty
Initial $2,988 · Current $2,988
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder.  :  (a) Worksite:  On or about 4/3/2017, employees were not protected from falling while using a ladder that did not extend at least three feet above the upper landing surface.
Recent events (1)
  • — Z (S) $2988

1926.501 B13

Willful Gravity 10 1 instance 4 exposed
Issued
Apr 24, 2017
Penalty
Initial $27,885 · Current $27,885
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):   (a) Worksite:  On or about 4/3/2017, employees were not protected from falling while working on a roof approximately twenty-five feet above a lower level.
Recent events (1)
  • — Z (W) $27885

1926.100 A

Repeat Gravity 10 1 instance 4 exposed
Issued
Apr 24, 2017
Penalty
Initial $8,366 · Current $8,366
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:   (a) Worksite:  On or about 4/3/2017, employees were not protected from overhead hazards while working below roofers.  GCB Remodeling, LLC was previously cited for a violation of this occupational safety and health standard, 29 CFR 1926.100(a), which was contained in OSHA inspection number 1203583, citation number 001, item number 01a and was affirmed as a final order on 3/27/2017, with respect to a workplace located at 389 Glenwood Avenue, Pawtucket RI, 02860.
Recent events (1)
  • — Z (R) $8366

1926.102 A01

Repeat Gravity 10 1 instance 3 exposed
Issued
Apr 24, 2017
Penalty
Initial $8,366 · Current $8,366
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  (a) Worksite:  On or about 4/3/2017, eye and face protective equipment was not used when employees were operating pneumatic nail guns.   GCB Remodeling, LLC was previously cited for a violation of this occupational safety and health standard, 29 CFR 1926.102(a)(1), which was contained in OSHA inspection number 1203583, citation number 001, item number 01b and was affirmed as a final order on 3/27/2017, with respect to a workplace located at 389 Glenwood Avenue, Pawtucket RI, 02860.
Recent events (1)
  • — Z (R) $8366

1926.1053 B15

Repeat 1 instance 1 exposed
Issued
Apr 24, 2017
Penalty
Initial $1,196 · Current $1,196
29 CFR 1926.1053(b)(15): Ladders were not inspected by a competent person for visible defects on a periodic basis and/or after an occurrence that could have affected their safe use:   (a) Worksite:  On or about 4/3/2017, employees were exposed to fall hazards from a ladder which had not been inspected for visible defects.  GCB Remodeling, LLC, was previously cited for a violation of this occupational safety and health standard, 29 CFR 1926.1053(b)(15), which was contained in OSHA inspection number 1203583, citation number 001, item number 03a and was affirmed as a final order on 3/27/2017, with respect to a workplace located at 389 Glenwood Avenue, Pawtucket, RI, 02860.
Recent events (1)
  • — Z (R) $1196

1926.1053 B16

Repeat Gravity 10 1 instance 1 exposed
Issued
Apr 24, 2017
Penalty
Initial $8,366 · Current $8,366
29 CFR 1926.1053(b)(16): Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, were not either immediately marked in a manner that readily identifies them as defective, or tagged with "Do Not Use" or similar language, and were not withdrawn from service until repaired:  (a) Worksite:  On or about 4/3/2017, a portable extension ladder with damaged rungs was not withdrawn from service.  GCB Remodeling, LLC was previously cited for a violation of this occupational safety and health standard, 29 CFR 1926.1053(b)(16), which was contained in OSHA inspection number 1203583, citation number 001, item number 03b and was affirmed as a final order on 3/27/2017, with respect to a workplace located at 389 Glenwood Avenue, Pawtucket RI, 02860.
Recent events (1)
  • — Z (R) $8366

View GCB Remodeling, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342220233.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.