OSHA Inspection: ACCO BRANDS USA LLC

Issued

Jun 13, 2017

Abate by

Jul 10, 2017

Penalty

Initial $9,054 · Current $9,054

General-duty citation text

29 CFR 1910.176(a): Permanent aisles or passageways were not appropriately marked:    a)  Aisle Near Battery Change Area - Employees walking through or disposing of roll cores, scrap paper or roll wrappers were exposed to a struck-by hazard from sharing an aisle with a forklift and not differentiating between forklift and personnel aisle ways, on or about April 5th, 2017.    Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.    ---------------------------------------------------------------------------------------------------------------------------------------------  standard modified from 1910.176(a) to 1910.178(m)(1) by FSA - dated 1/2/18    29 CFR 1910.178(m)(1):     Trucks shall not be driven up to anyone standing in front of a bench or other fixed object.    (a)  Aisle Near Battery Change Area - An Employee driving a forklift struck an employee in an aisle adjacent to fixed objects on or about April 5, 2017.

Issued

Jun 13, 2017

Abate by

Jul 10, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  a) Post G13 - Employees working on or near panel CH12 were exposed to electrical hazards from non-manufacturer parts installed and panel cover bolts missing, on or about April 18th, 2017.   b) Post G13 - Employees working on or near panel CP15 were exposed to electrical hazards from non-manufacturer parts installed and panel cover bolts missing, on or about April 18th, 2017.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

Jun 13, 2017

Abate by

Jul 10, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(7)(iv): Equipment with damaged parts that may adversely affect its safe operation or its mechanical strength, such as broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating parts shall not be used:    a) Post G13 - Employees working on or near panel CH12 were exposed to electrical hazards from a damaged panel box, on or about April 18th, 2017.     b) Post G13 - Employees working on or near panel CP15 were exposed to electrical hazards from a bent panel cover and a damaged panel box, on or about April 18th, 2017.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.  --------------------------------------------------------------------------------------------------------------------------------------  AVD modified to via FSA - 1/2/18    (a)  Post G13 - Employees working on or near panel CH12 were exposed to electrical hazards from parts that were not appropriate for use and panel cover bolts missing, on or about April 18, 2017.    (b)  Post G13 - Employees work on or near panel CH15 were exposed to electrical hazards from parts that were not appropriate for use and panel cover bolts missing, on or about April 18, 2017.