GEORGETOWN, MA —
OSHA Inspection: M J INDUSTRIES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of M J INDUSTRIES, INC. in 4 CARLETON DRIVE, GEORGETOWN, MA 01833 (NAICS 337127). OSHA activity number 342286994.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- M J INDUSTRIES, INC.
- Site address
- 4 CARLETON DRIVE
- City
- GEORGETOWN
- State
- MA
- ZIP
- 01833
- Mailing
- 4 CARLETON DRIVE P.O. BOX 259, GEORGETOWN, MA 01833
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337127
- Employees
- 11
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 6, 2017
- Abate by
- Jul 24, 2017
- Penalty
- Initial $5,070 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Location - Production: On or about 4/25/17, the employer failed to guard an Amada RG-100 press brake.
Recent events (2)
- — I (S) $3500
- — Z (S) $5070
1910.217 B13
- Issued
- Jun 6, 2017
- Abate by
- Jul 24, 2017
- Penalty
- Initial $3,622 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.217(b)(13): Control system(s) of mechanical power press(es) were not constructed so that a failure within the system would not prevent the normal stopping action from being applied to the press when required, but would prevent initiation of a successive stroke until the failure is corrected. (a) Location - Production: On or about 5/18/17, the employer failed to provide control reliability on the Minster 7 mechanical power press. (b) Location - Production: On or about 5/18/17, the employer failed to provide control reliability on the Minster 50-6.5-72 mechanical power press.
Recent events (2)
- — I (S) $2500
- — Z (S) $3622
1910.217 B14 III
- Issued
- Jun 6, 2017
- Abate by
- Jul 24, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(b)(14)(iii): Brake system monitoring on mechanical power press(es) was not constructed and installed in a manner to monitor brake system performance on each stroke: (a) Location - Production: On or about 5/18/17, the employer failed to provide a brake monitor on the Minster 7 mechanical power press. (b) Location - Production: On or about 5/18/17, the employer failed to provide a brake monitor on the Minster 50-6.5-72 mechanical power press.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 B07 V C
- Issued
- Jun 6, 2017
- Abate by
- Jul 24, 2017
- Penalty
- Initial $3,622 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(b)(7)(v)(c): The two hand control system of mechanical power press(es) using part revolution clutches did not incorporate an anti repeat feature: (a) Location - Production: On or about 5/18/17, a Minster 50-6.5-72 part revolution mechanical power press did not have an anti repeat device.
Recent events (2)
- — I (S) $0
- — Z (S) $3622
1910.217 B07 XI
- Issued
- Jun 6, 2017
- Abate by
- Jul 24, 2017
- Penalty
- Initial $3,622 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(b)(7)(xi): The clutch/brake air valve control(s) used on mechanical power press(es) with part revolution clutches were not designed to prevent a significant increase in the normal stopping time due to a failure within the operating valve mechanism. (a) Location - Production: On or about 5/18/17, the employer failed to provide dual air valve controls on a Minster 7 mechanical power press.
Recent events (2)
- — I (S) $0
- — Z (S) $3622
1904.39 A02
- Issued
- Jun 6, 2017
- Abate by
- Jun 12, 2017
- Penalty
- Initial $500 · Current $100 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours. (a) Location - MJ Industries: On or about 4/26/17, the employer failed to report an amputation injury to OSHA within twenty-four (24) hours.
Recent events (2)
- — I (O) $100
- — Z (O) $500
More inspections at M J Industries, INC.
View M J Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337127)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342286994.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.