LANCASTER, NY —
OSHA Inspection: MOLDTECH, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MOLDTECH, INC. in 1900 COMMERCE PARKWAY, LANCASTER, NY 14086 (NAICS 326291). OSHA activity number 342287174.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOLDTECH, INC.
- Site address
- 1900 COMMERCE PARKWAY
- City
- LANCASTER
- State
- NY
- ZIP
- 14086
- Mailing
- 1900 COMMERCE PARKWAY, LANCASTER, NY 14086
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326291
- Employees
- 69
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.132 D02
- Issued
- Jun 16, 2017
- Abate by
- Jul 11, 2017
- Penalty
- Initial $6,338 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment: a) On or about 05/01/2017 throughout establishment: where employees were exposed to hazards requiring personal protective equipment, such as but not limited to: flying chips and sparks, noise, welding arc radiation and sharp metal parts. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $5000
- — C (S) $6338
- — Z (S) $6338
1910.212 A01
- Issued
- Jun 16, 2017
- Abate by
- Jul 11, 2017
- Penalty
- Initial $8,873 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 04/28/2017 in the machine shop; where employees were exposed to rotating parts and spinning metal "ribbons" (from machining metal parts) which were able to catch a gloved hand and pull the hand into the rotating milling spindle. ABATMENT DOCUMENTATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $8873
- — Z (S) $8873
1904.32 B03
- Issued
- Jun 16, 2017
- Abate by
- Jul 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.32(b)(3): The person who certified the annual summary (OSHA 300A) was not a company executive as defined in 29 CFR 1904.32(b)(4): On or about 05/01/2017; where the 2014, 2015, 2016 OSHA 300As were signed by the Quality Technician (not the company President). ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
1910.147 C06 I C
- Issued
- Jun 16, 2017
- Abate by
- Jul 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i)(C): Where lockout was used for energy control, the periodic inspection did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected: a) On or about 05/01/2017 throughout establishment; where employees perform servicing and/or maintenance such as, but not limited to: setting up and repairing machines and equipment, the employer had not performed a periodic review (at least annually). ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Moldtech, INC.
View Moldtech, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326291)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342287174.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.