OSHA Inspection: DIAMOND EQUIPMENT CONTRACTING CORPORATION

Issued

Jun 15, 2017

Penalty

Initial $2,094 · Current $2,094

General-duty citation text

29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupters for personal protection:  a)       Navy Gateway Inn and Suites, Dam Neck: On or about 05/11/2017, the Honda generator EB6500 used to supply temporary power to a portable core drill was not provided with a ground fault circuit interrupter device thereby exposing employees to a possible shock hazard.  No abatement certification or documentation required.

Issued

Jun 15, 2017

Abate by

Jul 12, 2017

Penalty

Initial $1,847 · Current $1,847

General-duty citation text

29 CFR 1926.502(i)(3): All covers were not secured when installed so as to prevent accidental displacement by the wind, equipment, or employees:  a)    Navy Gateway Inn and Suites, Dam Neck: On or about 05/11/2017, employees worked in spaces that had wood boards covering holes greater than 2 inches in diameter in concrete floors and the wood boards were not secured.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

Jun 15, 2017

Abate by

Jul 12, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.502(i)(4): All covers were not color coded or marked with the word "HOLE" or "COVER" to provide warning of the hazard:  a)     Navy Gateway Inn and Suites, Dam Neck: On or about 05/11/2017, employees worked in areas where wood boards were used to cover holes in the floor and the wood boards were not marked to warn employees of a hazard.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.