CORPUS CHRISTI, TX —
OSHA Inspection: GULF COAST REPAIR & MACHINE SHOP, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GULF COAST REPAIR & MACHINE SHOP, INC. in 6802 LEOPARD STREET, CORPUS CHRISTI, TX 78409 (NAICS 332710). OSHA activity number 342340601.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GULF COAST REPAIR & MACHINE SHOP, INC.
- Site address
- 6802 LEOPARD STREET
- City
- CORPUS CHRISTI
- State
- TX
- ZIP
- 78409
- Mailing
- P.O. BOX 260591, CORPUS CHRISTI, TX 78426
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 52
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.242 B
- Issued
- Oct 3, 2017
- Abate by
- Oct 16, 2017
- Penalty
- Initial $3,802 · Current $3,802
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: At this work site, air hoses that were used for cleaning off steel particles were not equipped with an effective reducing valve or other method to prevent the p.s.i. (pounds per square inch) from exceeding 30 p.s.i.
Recent events (2)
- — I (S) $3802
- — Z (S) $3802
1910.305 A02 I B
- Issued
- Oct 3, 2017
- Abate by
- Oct 16, 2017
- Penalty
- Initial $5,070 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(a)(2)(i)(B): Temporary wiring was used for a period exceeding 90 days. At this location, temporary wiring was being used to power up the lighting in the work area for more than 90 days.
Recent events (2)
- — I (S) $0
- — Z (S) $5070
1910.305 B01 II
- Issued
- Oct 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: At this site, several electrical cabinets had knock-out holes not covered with exposed live wiring.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 II
- Issued
- Oct 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used in continuous lengths without splice or tap: At this site, an electrical hand held grinder was used in daily operations with a visible damaged flexible cord.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K06
- Issued
- Oct 3, 2017
- Abate by
- Oct 16, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: At this worksite, employees used respirators on a voluntary basis and were not presented with Appendix D.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Gulf Coast Repair & Machine Shop, INC.
View Gulf Coast Repair & Machine Shop, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342340601.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.