OSHA Inspection: COMPLETE MANUFACTURING SERVICES, INC.

Issued

Jul 24, 2017

Abate by

Jul 28, 2017

Penalty

Initial $2,390 · Current $1,195 Reduced

General-duty citation text

29 CFR 1910.23(b)(10): The employer did not ensure that any ladder with structural or other defects was immediately tagged "Dangerous: Do Not Use" or with similar language in accordance with �1910.145 and removed from service until repaired in accordance with �1910.22(d), or replaced.    a. On or about June 13, 2017, and time prior thereto, in the Paint Booth where employees were exposed to fall hazards when using a repaired Werner 8-foot stepladder without the ladder being tagged and removed from service or repaired by a qualified person.     b. On or about June 13, 2017, and time prior thereto, in the Paint Booth where employees were exposed to fall hazards when using a repaired 6-foot stepladder without the ladder being tagged and removed from service or repaired by a qualified person.

Issued

Jul 24, 2017

Abate by

Sep 8, 2017

Penalty

Initial $5,577 · Current $2,231 Reduced

General-duty citation text

29 CFR 1910.107(h)(12): All areas used for spraying, including the interior of the booth, were not protected by automatic sprinklers where this protection is available. Where this protection is not available, other approved automatic extinguishing equipment was not provided.    On or about June 13, 2017, and times prior thereto, in the Paint Booth where employees were exposed to fire and explosion hazards when spraying flammable paints without automatic sprinklers or other approved automatic extinguishing equipment.

Issued

Jul 24, 2017

Abate by

Aug 10, 2017

Penalty

Initial $5,577 · Current $2,789 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a. On or about June 13, 2017, and times prior thereto, in the Machine Shop where employees were exposed to struck-by hazards when setting-up an Atlantic Press Brake, Model HDE 20012, S/N 90229 without procedures to control potentially hazardous energy.     b. On or about June 13, 2017, and times prior thereto, in the Machine Shop where employees were exposed to struck-by hazards when setting-up an AccurPress, Model 713014, S/N 10400 without procedures to control potentially hazardous energy.     c. On or about June 13, 2017, and times prior thereto, in the Machine Shop where employees were exposed to struck-by hazards when setting-up an AccurShear, Model 625012 without procedures to control potentially hazardous energy.

Issued

Jul 24, 2017

Abate by

Aug 10, 2017

Penalty

Initial $3,985 · Current $1,993 Reduced

General-duty citation text

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    On or about June 13, 2017, and times prior thereto, in the Machine Shop Warehouse Area where an employee was exposed to chemical burn hazard charging forklift batteries without suitable facilities for quick drenching or flushing of the eyes and body.

Issued

Jul 24, 2017

Abate by

Aug 10, 2017

Penalty

Initial $4,780 · Current $1,912 Reduced

General-duty citation text

29 CFR 1910.157(e)(1): The employer shall be responsible for the inspection, maintenance and testing of all portable fire extinguishers in the workplace:    a. On or about June 13, 2017, and times prior thereto, in the Machine Shop Welding Area where employees were exposed to fire hazards when welding metal parts without portable fire extinguishers that had not been inspected.    b. On or about June 13, 2017, and times prior thereto, in the Machine Shop Warehouse Area where employees were exposed to fire hazards when charging forklift batteries without portable fire extinguishers that had not been inspected.    c. On or about June 13, 2017, and times prior thereto, in the North Machine Shop Area where employees were exposed to fire hazards when operating machines and grinders without portable fire extinguishers that had not been inspected.    d. On or about June 13, 2017, and times prior thereto, in the Powder Coating Area where employees were exposed to fire hazards when applying powder spray without portable fire extinguishers that had not been inspected.

Issued

Jul 24, 2017

Abate by

Aug 10, 2017

Penalty

Initial $797 · Current $399 Reduced

General-duty citation text

29 CFR 1904.29(a): The employer did not use an OSHA 300, 301 and 300A Form or equivalent.    On or about June 13, 2017, and times prior thereto, throughout the facility where the employer had a work related injury and did not record the injury on an OSHA Form 300, 301, and 300A or equivalent.

Issued

Jul 24, 2017

Abate by

Jul 28, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  On or about June 13, 2017, and times prior thereto, employees in the Paint Booth and Powder Coating areas, were required to wear 3M 6200 Half-face Respirators without being medically evaluated before use.

Issued

Jul 24, 2017

Abate by

Jul 28, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:  On or about June 13, 2017, and times prior thereto, employees in the Paint Booth and Powder Coating areas, were required to wear 3M 6200 Half-face Respirators without being fit tested prior to initial use.

Issued

Jul 24, 2017

Abate by

Jul 28, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary:  On or about June 13, 2017, and times prior thereto, employees in the Paint Booth and Powder Coating areas, were required to wear 3M 6200 Half-face Respirators without annual or more often training.