RIDGECREST, CA —
OSHA Inspection: NAVAL FACILITIES ENGINEERING COMMAND - CHINA LAKE CARPENTER SHOP
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NAVAL FACILITIES ENGINEERING COMMAND - CHINA LAKE CARPENTER SHOP in BUILDING, RIDGECREST, CA 93555 (NAICS 928110). OSHA activity number 342412970.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Site address
- BUILDING
- City
- RIDGECREST
- State
- CA
- ZIP
- 93555
- Mailing
- 429 EAST BOWEN AVENUE STOP 4007, RIDGECREST, CA 93555
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 928110
- Employees
- 8
- Ownership type
- D
Citations
4 citations on file for this inspection.
1910.28 B01 I
- Issued
- Dec 5, 2017
- Abate by
- Jan 2, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.28(b)(1)(i): There was no fall protection provided where walking/working surfaces have unprotected sides and edges that are 4 feet or more above a lower level: Carpenter Shop: Employees were exposed to a fall of approximately eight feet five and one half inches to the concrete floor below while moving material/furniture on the break room platform.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C02
- Issued
- Dec 5, 2017
- Abate by
- Jan 2, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: Carpenter Shop: Employees are exposed to an impalement hazard by using SawStop Ten Inch Industrial Cabinet Saw without spreader to prevent the wood from binding and being thrown back toward the operator if the blade pinches or binds during the ripping cut of plywood and/or baseboards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Dec 5, 2017
- Abate by
- Jan 2, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: Carpenter Shop: Employees are exposed to an impalement hazard by using SawStop Ten Inch Industrial Cabinet Saw without kickback dogs to prevent the wood from thrown back toward the operator if the blade pinches or binds during the ripping cut of plywood and/or baseboards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Dec 5, 2017
- Abate by
- Jan 2, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Carpenter Shop: Employees were exposed to caught in hazards while working on the Delta 18 Inch Laser Drill Press, Serial Number 12H000524 2012 31 RH with an unguarded chuck. THE U. S. NAVY WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCUPATIONAL SAFETY AND HEALTH STANDARD, WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 967513, CITATION 01, ITEM NUMBER 00 AND WAS AFFIRMED AS A FINAL ORDER ON JUNE 25, 2016, WITH RESPECT TO A WORKPLACE LOCATED AT U. S. NAVY, NAVFAC LEMOORE - NAVAL FACILTIES ENGINEERING COMMAND SOUTHWEST REGION, BUILDING 750 ENTERPRISE AVENUE, LEMOORE NAVAL IR STATION, CALIFORNIA 93246.
Recent events (2)
- — I (R) $0
- — Z (R) $0
More inspections at Naval Facilities Engineering Command - China Lake Carpenter Shop
View Naval Facilities Engineering Command - China Lake Carpenter Shop's full OSHA safety record →
More inspections in this industry (NAICS 928110)
More inspections in CA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342412970.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.