Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: OAK HILL VENEER, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of OAK HILL VENEER, INC. in P.O. BOX 304 ROUTE 14 NORTH, TROY, PA 16947 (NAICS 321912). OSHA activity number 342475530.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch OAK Hill Veneer, INC. — free Get an email when a new federal OSHA severe-injury report for OAK Hill Veneer, INC. is published. One employer, no account, unsubscribe in one click.
Site address
P.O. BOX 304 ROUTE 14 NORTH
City
TROY
State
PA
ZIP
16947
Mailing
P.O. BOX 304 ROUTE 14 NORTH, TROY, PA 16947
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321912
Employees
72
Ownership type
A

4 citations on file for this inspection.

1910.212 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 29, 2017
Abate by
Nov 6, 2017
Penalty
Initial $4,741 · Current $2,500 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a) Production Area:  Employees operating the Capital Machine Co. vertical slicer were exposed to struck-by hazards created by the movement of the carriage during the press cycle, observed on or about July 21, 2017.    Abatement Certification Required
Recent events (2)
  • — I (S) $2500
  • — Z (S) $4741

1910.147 C06 I

Other-than-serious 1 instance 5 exposed
Issued
Sep 29, 2017
Abate by
Nov 6, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:          a) At the Facility:  An annual inspection of the energy control procedures (Lockout/Tagout) was not conducted at least annually by the employer, on or about July 21, 2017.                                             ABATEMENT CERTIFICATION IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 P01

Other-than-serious 1 instance 3 exposed
Issued
Sep 29, 2017
Abate by
Nov 6, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):    a) Outside Building #1:  The seat of the Hyster Pioneer 80 gas forklift  was defective and it was not taken out of service until repaired, as observed on or about July 21, 2017.                                            ABATEMENT CERTIFICATION IS REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 L02 II

Other-than-serious 1 instance 2 exposed
Issued
Sep 29, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace:   a) At the facility:  Employees were allowed to operate forklifts without first receiving formal instruction and practical training. Employees were exposed to powered industrial trucks hazards as observed on or about July 21, 2017.                                                                        CORRECTED DURING INSPECTION.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View OAK Hill Veneer, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342475530.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.