IVYLAND, PA —
OSHA Inspection: OMNIMAX INTERNATIONAL, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of OMNIMAX INTERNATIONAL, INC. in 900 JACKSONVILLE ROAD, IVYLAND, PA 18974 (NAICS 332322). OSHA activity number 342511037.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OMNIMAX INTERNATIONAL, INC.
- Site address
- 900 JACKSONVILLE ROAD
- City
- IVYLAND
- State
- PA
- ZIP
- 18974
- Mailing
- 805 PENNSYLVANIA BLVD., FEASTERVILLE TREVOSE, PA 19053
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 60
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 II
- Issued
- Dec 20, 2017
- Abate by
- Jan 5, 2018
- Penalty
- Initial $5,387 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): a) Press Shop Machine # 11001 - On or about July 27, 2017, the control of hazardous energy procedures did not clearly and specifically outline authorization, rules, and techniques to be utilized for the control of hazardous energy.
Recent events (2)
- — I (S) $0
- — Z (S) $5387
1910.147 C06 II
- Issued
- Dec 20, 2017
- Abate by
- Jan 5, 2018
- Penalty
- Initial $0 · Current $4,000
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that the periodic inspections have been performed to identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection. a) Press Shop Machine # 11001 - On or about July 27, 2017, the employer did not certify that that a periodic inspection had been performed for all authorized employees performing lock out tag procedures.
Recent events (2)
- — I (S) $4000
- — Z (S) $0
1910.217 C02 I A
- Issued
- Dec 20, 2017
- Abate by
- Jan 5, 2018
- Penalty
- Initial $5,387 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(c)(2)(i)(a): Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s): a) Press Shop Machine # 11001 - On or about July 27, 2017, point of operation guards installed on the front of a Heim Mechanical Power Press were not utilized in a manner to prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guards. b) Press Shop Machine # 11001 - On or about July 27, 2017, point of operation finger guards were not installed within the guard frame on the right side and material ingoing point of a Heim Mechanical Power Press and did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard frame.
Recent events (2)
- — I (S) $0
- — Z (S) $5387
1910.217 D09 I
- Issued
- Dec 20, 2017
- Abate by
- Jan 5, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(d)(9)(i): The employer did not establish a die setting procedure for mechanical power press(es) that would ensure compliance with 29 CFR 1910.217(c) b) Press Shop Machine # 11001 - On or about July 27, 2017, the employer's die setting procedures did not contain information for the removal, installation, and adjustments, of guards or other methods required to ensure safeguarding the point of operation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 E01 I
- Issued
- Dec 20, 2017
- Abate by
- Jan 5, 2018
- Penalty
- Initial $253 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(e)(1)(i): A program of periodic and regular inspections of mechanical power press(es) was not established and followed to ensure that all parts, auxiliary equipment and safeguards were in a safe operating condition and adjustment: a) Press Shop Machine # 11001 - On or about July 27, 2017, the employer did not maintain records of mechanical power press inspections and maintenance work performed.
Recent events (2)
- — I (O) $0
- — Z (R) $253
1910.303 B02
- Issued
- Dec 20, 2017
- Abate by
- Jan 5, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) Press Shop - On or about July 27, 2017, metal knock out boxes designed for being permanently mounted to a structure were being used as hanging pendants. b) Press Shop - On or about July 27, 2017, the door of the electric panel control box attached to Press #11001 was missing bolts or screws meant to secure the door in the closed position.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Omnimax International, INC.
View Omnimax International, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342511037.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.