OSHA Inspection: LENOX HILL CONSTRUCTION, INC.

Issued

Oct 26, 2017

Abate by

Dec 18, 2017

Penalty

Initial $406 · Current $406

General-duty citation text

29 CFR 1903.19(c)(1):  The employer failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Lenox Hill Construction, Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                     Item Number                          Abatement Date    01                                                 01                                            09/18/2017   01                                     03                                            09/18/2017    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Oct 26, 2017

Abate by

Dec 18, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.     Lenox Hill Construction, Inc. failed to submit documents to OSHA verifying that each of the following cited violations had been corrected:     Citation Number                     Item Number                          Abatement Date    01                                                 02                                            09/01/2017     In accordance with 29 CFR 1903.19(d), abatement documentation is required for this violation.

Issued

Aug 18, 2017

Abate by

Sep 18, 2017

Penalty

Initial $2,607 · Current $2,607

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):   On or about August 2, 2017, employees were exposed to struck-by hazards when an employee operated a rough terrain forklift to perform routine job tasks at the site.  The employer did not ensure the operator receiving training prior to operating a powered industrial truck.   Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).

Issued

Aug 18, 2017

Abate by

Sep 1, 2017

Penalty

Initial $4,563 · Current $4,563

General-duty citation text

29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  On or about August 2, 2017, employees were exposed to a 12 foot fall hazard while installing rim board, trusses, and laterals on the second floor deck of a commercial property and the employer did not ensure employees were protected from a fall.  Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).

Issued

Aug 18, 2017

Abate by

Sep 18, 2017

Penalty

Initial $3,259 · Current $3,259

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   On or about August 2, 2017, employees were exposed to a 12 foot fall hazard while installing rim board, trusses, and laterals on the second floor deck of a commercial property.  The employees were not trained to recognize or minimize the hazards associated with a fall.     Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).