OSHA Inspection: GRAND IRON WORK INC.

Issued

Feb 8, 2018

Abate by

Mar 14, 2018

Penalty

Initial $311 · Current $311

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   Grand Iron Work Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number            Item Number                    Abatement Date  01                                01                                   11/07/2017  01                                02                                   11/07/2017  02                                01                                   11/07/2017  02                                02                                   11/07/2017  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).

Issued

Nov 1, 2017

Abate by

Nov 7, 2017

Penalty

Initial $4,183 · Current $4,183

General-duty citation text

29 CFR 1926.351(b)(4): Welding cable(s) in use were in need of repair:  a) On August 3, 2017, employees were provided with and used welding cables with worn insulation as evidenced by the exposed un-insulated conductors.

Issued

Nov 1, 2017

Abate by

Nov 7, 2017

Penalty

Initial $4,183 · Current $4,183

General-duty citation text

29 CFR 1926.760(a)(1): Each employee engaged in steel erection activity who was on a walking/working surface with an unprotected side or edge more than 15 feet (4.6m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems or personal fall restraint systems:  a) On August 3, 2017, employees working on the structural steel frame work of the building were not protected from falling approximately 31 feet.

Issued

Nov 1, 2017

Abate by

Nov 7, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous:  a) On August 3, 2017, the employer provided for employee use at the job site an extension cord that did not have a grounding pin.

Issued

Nov 1, 2017

Abate by

Nov 7, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used:  a) On August 3, 2017, the insulation on the flexible cord being used by employees to provide power to the top floor of the building was worn as evidenced by the exposed insulated conductors.