Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LANDMARK ELECTRIC INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of LANDMARK ELECTRIC INC in 789 ELMGROVE ROAD, ROCHESTER, NY 14624 (NAICS 238210). OSHA activity number 342529591.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Landmark Electric INC — free Get an email when a new federal OSHA severe-injury report for Landmark Electric INC is published. One employer, no account, unsubscribe in one click.
Site address
789 ELMGROVE ROAD
City
ROCHESTER
State
NY
ZIP
14624
Mailing
50 COMMERCE DRIVE, ROCHESTER, NY 14623
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238210
Employees
2
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 27, 2017
Abate by
Oct 5, 2017
Penalty
Initial $8,873 · Current $3,000 Reduced
OSH ACT of 1970 Section (5)(a)(1):     The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:    a)  On or about August 2, 2017 at the Hammer Packaging worksite in Rochester, NY.  The employer did not provide adequate training as to the configuration of the electric feed so as to assist employees in recognizing the hazards of entering cabinet without first arranging for the de-energizing of the adjacent equipment.   Employees were not informed of the configuration of the wiring system/switch prior to the commencement of work.
Recent events (3)
  • — J (S) $3000
  • — C (S) $8873
  • — Z (S) $8873

1910.335 A01 I

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Sep 27, 2017
Abate by
Oct 5, 2017
Penalty
Initial $8,873 · Current $0 Reduced
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not using electrical protective equipment that was appropriate for the specific parts of the body to be protected and for the work to be performed:       a) On or about 08/02/17, at the host employer's site (Hammer Packaging) located at 789 Elmgrove Road in Rochester, New York, employees exposed to live energized circuits did not wear protective clothing or personal protective equipment to prevent electrical burns or shock.   ABATEMENT DOCUMENTATION REQUIRED
Recent events (3)
  • — J (S) $0
  • — C (S) $8873
  • — Z (S) $8873

1910.335 A02 I

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Sep 27, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.335(a)(2)(i): When working near exposed energized conductors or circuit parts, each employee did not use insulated tools or handling equipment when the tools or handling equipment might have made contact with such conductors or parts:      (a)     On or about 08/02/17, at the host employer's site (Hammer Packaging) located at 789 Elmgrove Road in Rochester, New York employees exposed to live energized circuits, a tool used to work on a "Fusible Panel Unit" was not rated or insulated for electrical work.   ABATEMENT DOCUMENTATION REQUIRED
Recent events (3)
  • — J (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.147 F02 I

Other-than-serious 1 instance 3 exposed
Issued
Sep 27, 2017
Abate by
Oct 5, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.147(f)(2)(i): When outside servicing personnel were engaged in activities in a facility, the onsite employer and the outside employer did not inform each other of their respective lockout or tagout procedures:   (a)     On or about 08/02/17, at the host employer's site (Hammer Packaging) located at 789 Elmgrove Road in Rochester, New York, lockout procedures were not exchanged between the host employer or the outside contractor.   ABATEMENT DOCUMENTATION REQUIRED
Recent events (3)
  • — J (O) $0
  • — C (O) $0
  • — Z (O) $0

View Landmark Electric INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342529591.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.