PEVELY, MO ·
OSHA Inspection: ARDAGH GLASS INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ARDAGH GLASS INC. in 1500 ARDAGH GROUP DRIVE, PEVELY, MO 63070 (NAICS 327213). OSHA activity number 342543899.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ARDAGH GLASS INC.
- Site address
- 1500 ARDAGH GROUP DRIVE
- City
- PEVELY
- State
- MO
- ZIP
- 63070
- Mailing
- 1500 ARDAGH GROUP DRIVE, PEVELY, MO 63070
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327213
- Employees
- 250
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.29 F04
- Issued
- Aug 22, 2017
- Abate by
- Oct 10, 2017
- Penalty
- Initial $7,243 · Current $3,622 Reduced
General-duty citation text
29 CFR 1910.29(f)(4): Opening in a stair rail system exceeded 19 inches (48 cm) at its least dimension: At 1500 Ardagh Group Drive, St. Louis, MO 63070, specifically inside of the Maintenance Department, the metal flight of stairs, 12 risers high, with two open sides, were not equipped with an intermediate rails. The distance between the top rail and the tread measured approximately 32 inches. This violation was observed on 08/15/17.
Recent events (2)
- · I (O) $3621.5
- · Z (S) $7243
1910.212 A01
- Issued
- Aug 22, 2017
- Abate by
- Oct 10, 2017
- Penalty
- Initial $9,054 · Current $4,527 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: At 1500 Ardagh Group Drive, Pevely, MO 63070, specifically inside of the Maintenance Department, the rotating parts belonging to the following machines were unguarded: a/ Bridgeport Milling Machine, m/n 65068, s/n J-68423. b/ Wilton Horizontal Band Saw, m/n 7020, s/n 0305142. At 1500 Ardagh Group Drive, Pevely, MO 63070, specifically inside of the Tool & Die Department, the rotating parts belonging to the following machines were unguarded: a/ JET Drilling Machine, m/n J-2221VS, s/n 12040771.
Recent events (2)
- · I (S) $4527
- · Z (S) $9054
1910.219 D01
- Issued
- Aug 22, 2017
- Abate by
- Oct 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulleys, any parts of which were seven (7) feet or less from the floor or working platform, were not guarded in accordance with the standards specified in paragraphs (m) and (o) of this section: At 1500 Ardagh Group Drive, Pevely, MO 63070, specifically inside of the Maintenance Department, the belt and pulley belonging to the Bridgeport Milling Machine, m/n 65088, s/n J-68423, were unguarded. This violation was observed on 08/15/17.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at Ardagh Glass INC.
View Ardagh Glass INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327213)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342543899.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.