NEW YORK, NY —
OSHA Inspection: CR MASONRY
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of CR MASONRY in 106 SOUTH STREET, NEW YORK, NY 10038 (NAICS 238140). OSHA activity number 342548567.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CR MASONRY
- Site address
- 106 SOUTH STREET
- City
- NEW YORK
- State
- NY
- ZIP
- 10038
- Mailing
- 7 RUTLEDGE STREET, BRENTWOOD, NY 11717
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.404 B01 I
- Issued
- Jan 31, 2018
- Penalty
- Initial $1,663 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites: a) On or about 8/9/17 at a rehabilitation project located at 106 South Street, New York, New York; an employee was using a angle grinders and electric mixer to perform masonry in-fills and repairs. The tools were plugged into extension cords and the employee(s) were not using ground fault circuit interrupters or an assured equipment grounding conductor program. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1000
- — Z (S) $1663
1926.404 F06
- Issued
- Jan 31, 2018
- Penalty
- Initial $1,663 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) On or about 8/9/17 at a rehabilitation project located at 106 South Street, New York, New York; an employees were using a angle grinders and electric mixer to perform masonry in-fills and repairs. The tools were plugged into an extension cord that was missing the ground prong. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1000
- — Z (S) $1663
1926.502 B01
- Issued
- Jan 31, 2018
- Penalty
- Initial $2,772 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.502(b)(1): The top edge height of the top rails, or equivalent guardrail system members, was not 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level: a) On or about 8/9/17 at a renovation project located at 106 South Street, New York, New York; guardrail systems through out the project had improper toprail heights that varied between 21" and 37". The guardrails were intended to protect stairwells, an elevator shaft, utility shafts, and the roofs edge. employees were exposed to falls of more than 40 feet. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1200
- — Z (S) $2772
More inspections at CR Masonry
View CR Masonry's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342548567.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.