MONSEY, NY —
OSHA Inspection: TOP NOTCH MASONRY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TOP NOTCH MASONRY INC. in 55 OLD NYACK TURNPIKE, MONSEY, NY 10952 (NAICS 238140). OSHA activity number 342580909.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TOP NOTCH MASONRY INC.
- Site address
- 55 OLD NYACK TURNPIKE
- City
- MONSEY
- State
- NY
- ZIP
- 10952
- Mailing
- P.O. BOX 149, MONSEY, NY 10952
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 1
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.451 G01
- Issued
- Sep 29, 2017
- Abate by
- Oct 12, 2017
- Penalty
- Initial $5,070 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level was not protected from falling to that lower level: location: exterior of building on or about: 8/22/17 a) Employees, engaged in masonry work from a tubular welded frame scaffold, were not provided with fall protection. The employees were exposed to a fall of up to 21'5". Note: In addition to abatement certification, the employer is required to provide abatement documentation for this item in accordance with 29 CFR 1903.19
Recent events (3)
- — F (S) $2500
- — C (S) $5070
- — Z (S) $5070
1926.501 B06
- Issued
- Sep 29, 2017
- Abate by
- Oct 12, 2017
- Penalty
- Initial $5,070 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.501(b)(6): Each employee on ramps, runways, and other walkways was not protected from falling 6 feet (1.8 m) or more to lower levels by guardrail systems: location: between 1st floor and outside of building on or about: 8/22/17 a) Employees were using two planks to access between the 1st floor from the outside of the building. The employees were not provided with fall protection and were exposed to a fall of 12'. Note: In addition to abatement certification, the employer is required to provide abatement documentation for this item in accordance with 29 CFR 1903.19
Recent events (3)
- — F (O) $2500
- — C (S) $5070
- — Z (S) $5070
1926.501 B14
- Issued
- Sep 29, 2017
- Abate by
- Oct 12, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.501(b)(14): "Wall openings." Each employee working on, at, above, or near wall openings (including those with chutes attached) where the outside bottom edge of the wall opening is 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 m) above the walking/working surface, were not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system: location: 1st floor on or about: 8/22/17 a) Employees, working and walking beside wall openings, were not provided with any means of fall protection. The employees were exposed to a fall of 12'. Note: In addition to abatement certification, the employer is required to provide abatement documentation for this item in accordance with 29 CFR 1903.19
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1926.451 B01
- Issued
- Sep 29, 2017
- Abate by
- Oct 12, 2017
- Penalty
- Initial $5,070 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds shall be fully planked or decked between the front uprights and the guardrail supports as follows: location: exterior of building on or about: 8/22/17 a) Employees were working from a tubular welded frame scaffold. The working levels of the scaffold were not fully decked. Employees were exposed to a fall of up to 21'5". Note: In addition to abatement certification, the employer is required to provide abatement documentation for this item in accordance with 29 CFR 1903.19
Recent events (3)
- — F (O) $0
- — C (S) $5070
- — Z (S) $5070
More inspections at TOP Notch Masonry INC.
View TOP Notch Masonry INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342580909.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.