Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AVW EQUIPMENT COMPANY INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of AVW EQUIPMENT COMPANY INC. in 110 S. 8TH ST., MAYWOOD, IL 60153 (NAICS 238160). OSHA activity number 342581378.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch AVW Equipment Company INC. — free Get an email when a new federal OSHA severe-injury report for AVW Equipment Company INC. is published. One employer, no account, unsubscribe in one click.
Site address
110 S. 8TH ST.
City
MAYWOOD
State
IL
ZIP
60153
Mailing
105 S 9TH AVE., MAYWOOD, IL 60153
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
40
Ownership type
A

4 citations on file for this inspection.

1926.501 B10

Serious Gravity 10 1 instance 5 exposed
Issued
Sep 27, 2017
Penalty
Initial $9,760 · Current $4,881 Reduced
29 CFR 1926.501(b)(10):  Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system:      a)  On August 23, 2017, employees engaged in roofing activities were exposed to falls approximately 15.6 feet.      No abatement certification or documentation is required for this item
Recent events (2)
  • — I (S) $4880.5
  • — Z (S) $9760

1926.503 A01

Serious Gravity 5 1 instance 5 exposed
Issued
Sep 27, 2017
Abate by
Oct 31, 2017
Penalty
Initial $6,972 · Current $0 Reduced
29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    a)  On or about August 23, 2017, employees were exposed to fall hazards while performing roofing work and the employer did not provide a training program to recognize fall hazards and the procedures to be followed in order to minimize those hazards.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $6972

1926.1053 B01

Serious Gravity 5 1 instance 5 exposed
Issued
Sep 27, 2017
Abate by
Oct 3, 2017
Penalty
Initial $8,365 · Current $4,182 Reduced
29 CFR 1926.1053(b)(1):  Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:    a)  On August 23, 2017, employees were using an A-frame ladder which did not extend 3 feet above the upper landing being accessed.       In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $4182
  • — Z (S) $8365

1926.1053 B04

Serious Gravity 5 3 instances 5 exposed
Issued
Sep 27, 2017
Abate by
Oct 3, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(4):  Ladder(s) were used for purposes other than the purpose for which they were designed:  a)  On August 23, 2017, employees were exposed to fall hazards while using an A-frame ladder without its metal spreaders or locking devices in the open position.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View AVW Equipment Company INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342581378.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.