Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WARREN DESIGN & BUILD, LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of WARREN DESIGN & BUILD, LLC in 2401 PARKMAN RD. NW, WARREN, OH 44485 (NAICS 541330). OSHA activity number 342632601.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Warren Design & Build, LLC — free Get an email when a new federal OSHA severe-injury report for Warren Design & Build, LLC is published. One employer, no account, unsubscribe in one click.
Site address
2401 PARKMAN RD. NW
City
WARREN
State
OH
ZIP
44485
Mailing
2401 PARKMAN RD. NW, WARREN, OH 44485
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
541330
Employees
14
Ownership type
A

8 citations on file for this inspection.

1910.132 D02

Serious Gravity 1 1 instance 14 exposed
Issued
Sep 27, 2017
Abate by
Apr 2, 2018
Penalty
Initial $2,173 · Current $869 Reduced
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and which identifies the document as a certification of hazard assessment:    On or about September 13, 2017, the workplace hazard assessment had not been put in writing and certified with the person conducting the evaluation and the dates the hazard assessment was completed. Safety glasses, welding helmet, and welding gloves were required.
Recent events (3)
  • — F (S) $869.2
  • — C (S) $2173
  • — Z (S) $2173

1910.132 F01

Serious Gravity 1 1 instance 14 exposed
Issued
Sep 27, 2017
Abate by
Apr 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.132(f)(1): The employer did not provide training to each employee required to use Personal Protective Equipment (PPE) that covered when PPE is necessary, what PPE is necessary, how to don, doff, adjust and wear PPE, the limitations of PPE and the proper care, maintenance, useful life and disposal of the PPE:    On or about September 13, 2017, the employees required to wear PPE have not been trained on when PPE is necessary, what PPE is necessary; how to don, doff, adjust and wear PPE; the limitations of PPE;  and the proper care, maintenance, useful life and disposal of the PPE. Employees are exposed to welding fumes, acetone, cutting oils and coolant. Safety glasses, welding helmets, and welding gloves were required.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.133 A03

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 27, 2017
Penalty
Initial $0 · Current $0
Recent events (2)
  • — C (S) $0
  • — Z (S) $0

1910.1200 E01

Serious Gravity 1 1 instance 14 exposed
Issued
Sep 27, 2017
Abate by
Apr 2, 2018
Penalty
Initial $2,173 · Current $869 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    On or about September 13, 2017, the company did not implement and maintain a written hazard communication program at the site. Employees are working with hazardous chemicals such as, but not limited to, acetone, cutting oils, welding fumes, and coolant.
Recent events (3)
  • — F (S) $869.2
  • — C (S) $2173
  • — Z (S) $2173

1910.1200 F06 I

Serious Gravity 1 1 instance 14 exposed
Issued
Sep 27, 2017
Abate by
Apr 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6)(i): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information required by 29 CFR 1910.1200(f)(1)(i) through 29 CFR 1910.1200(f)(1)(v):    On or about September 13, 2017, the employer did not ensure that spray bottles of acetone, weight oil, and coolant were labeled with the identity of the chemical. Unlabeled containers were located in the Milling Department on #4 Bridgeport and in the Welding Department.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.1200 G08

Serious Gravity 1 1 instance 14 exposed
Issued
Sep 27, 2017
Abate by
Apr 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required material safety data sheets for each hazardous chemical in the workplace:    On or about September 13, 2017, employees working with chemicals such as; but not limited to, acetone, cutting oils, and coolant did not have safety data sheets accessible to them.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 1 1 instance 14 exposed
Issued
Sep 27, 2017
Abate by
Apr 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): The employer did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees had not previously been trained about was introduced into their work area;    On or about September 13, 2017, the employer did not provide training to employees on hazardous chemicals such as, but not limited to, acetone, cutting oils, welding fumes, and coolant at the time of their initial assignment and when a new chemical was introduced.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.134 K06

Other-than-serious 1 instance 1 exposed
Issued
Sep 27, 2017
Abate by
Apr 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:    On or about September 26, 2017, the employer did not provide employees with Appendix D of the respiratory standard when voluntarily using N-95 filtering face piece respirators while working in the welding and cutting area.
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

View Warren Design & Build, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342632601.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.