DOVER, NH —
OSHA Inspection: VISHAY HIREL SSYSTEMS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of VISHAY HIREL SSYSTEMS, LLC in 140 CROSBY RD., DOVER, NH 03820 (NAICS 334416). OSHA activity number 342686185.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VISHAY HIREL SSYSTEMS, LLC
- Site address
- 140 CROSBY RD.
- City
- DOVER
- State
- NH
- ZIP
- 03820
- Mailing
- 140 CROSBY RD., DOVER, NH 03820
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334416
- Employees
- 105
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Jan 18, 2018
- Penalty
- Initial $11,641 · Current $8,730 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts: a. Site - On or about September 28, 2017, an employee assigned to operate the drill press which was not adequately guarded had received serious hand injuries while attempting to hold the material with a gloved hand during the drilling procedure.
Recent events (3)
- — F (S) $8730
- — C (S) $11641
- — Z (S) $11641
1910.215 A02
- Issued
- Jan 18, 2018
- Abate by
- Jan 24, 2018
- Penalty
- Initial $8,315 · Current $4,157 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: Instance a. Tooling - On or about October 4, 2017, the DeWalt (model DW 765 S/N 201649YL367) bilateral bench grinder's spindle end, nut and flange were not guarded on either side of the buffing wheels. Instance b. Tooling - On or about October 4, 2017, the Dayton bilateral bench grinder's spindle end, nut and flange were not guarded on either side of the buffing wheels.
Recent events (3)
- — F (S) $4157
- — C (S) $8315
- — Z (S) $8315
1910.303 B02
- Issued
- Jan 18, 2018
- Abate by
- Jan 24, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing and labeling: a. Tooling - On or about October 4, 2017, the electrical receptacle box designed for flat installation was used in the purpose of which was not designed, in that the box was hanging loosely from the ceiling.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.305 G02 III
- Issued
- Jan 18, 2018
- Abate by
- Jan 24, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: a. Shop area - On or about October 4, 2017, the power cords in use for the company's machines were not adequate, in that the strain relief devices were bypassed in lieu of tie wraps, creating joint and internal components damages to the cables.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 334416)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342686185.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.