Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NORTH PENN POLISHING & PLATING, INC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of NORTH PENN POLISHING & PLATING, INC in 40 WEST PARK AVENUE, SELLERSVILLE, PA 18960 (NAICS 332813). OSHA activity number 342770955.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch North Penn Polishing & Plating, INC — free Get an email when a new federal OSHA severe-injury report for North Penn Polishing & Plating, INC is published. One employer, no account, unsubscribe in one click.
Site address
40 WEST PARK AVENUE
City
SELLERSVILLE
State
PA
ZIP
18960
Mailing
P O BOX 370, 40 WEST PARK AVENUE, SELLERSVILLE, PA 18960
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332813
Employees
28
Ownership type
A

2 citations on file for this inspection.

1910.28 B06 I

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 26, 2018
Abate by
Feb 15, 2018
Penalty
Initial $3,492 · Current $2,444 Reduced

Hazardous substances 1430

29 CFR 1910.28(b)(6)(i): The employer did not ensure each employee less than 4 feet (1.2 m) above dangerous equipment was protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system when the equipment was not covered or guarded to eliminate the hazard:  a)  North Penn Polishing & Plating - On or about November 9, 2017, an employee was working on a catwalk adjacent to dip tanks containing corrosives, such as Sodium Hydroxide and Hydrochloric Acid, where the sides of the dip tanks were no more than 21" above the catwalk, exposing the employee to chemical burns, drowning, and/or fall hazards.  The employer did not provide fall protection for the tanks as required.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $2444.4
  • — Z (S) $3492

1910.1200 F06 I

Serious Gravity 1 1 instance 8 exposed
Issued
Jan 26, 2018
Abate by
Feb 15, 2018
Penalty
Initial $2,619 · Current $1,833 Reduced

Hazardous substances 2260

29 CFR 1910.1200(f)(6)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information required by 29 CFR 1910.1200(f)(1)(i) through 29 CFR 1910.1200(f)(1)(v):   a) North Penn Polishing & Plating - On or about December 14, 2017, employees directly dispensing from or working around an unlabeled 55 gallon drum of Sodium Hydroxide, were exposed to chemical burns to skin or eyes.    Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $1833.3
  • — Z (S) $2619

View North Penn Polishing & Plating, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342770955.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.