BUTLER, MO —
OSHA Inspection: BUTLER MILLING & SALES, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BUTLER MILLING & SALES, LLC in 707 RICE RD, BUTLER, MO 64730 (NAICS 311119). OSHA activity number 342777877.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BUTLER MILLING & SALES, LLC
- Site address
- 707 RICE RD
- City
- BUTLER
- State
- MO
- ZIP
- 64730
- Mailing
- 707 RICE RD, BUTLER, MO 64730
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311119
- Employees
- 19
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.28 B11 II
- Issued
- Feb 8, 2018
- Abate by
- Mar 15, 2018
- Penalty
- Initial $2,956 · Current $1,626 Reduced
General-duty citation text
29 CFR 1910.28(b)(11)(ii): Each flight of stairs having at least 3 treads and at least 4 risers was not equipped with stair rail systems and handrails in accordance with Table D-2, Stairway Handrail Requirements: Employees were exposed to tripping hazards. Employees were utilizing a flight of stairs without a handrail. A 41 inch wide flight of stairs to truck loading bay had 3 treads and 4 risers and did not have at least one handrail.
Recent events (2)
- — I (S) $1625.8
- — Z (S) $2956
1910.147 C04 II B
- Issued
- Feb 8, 2018
- Abate by
- Jul 15, 2018
- Penalty
- Initial $3,696 · Current $2,033 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedure did not clearly and specifically specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: Employees were exposed to electrical, pneumatic and stored energy hazards. Maintenance and mill employees perform lockout tagout. There were no machine specific lockout tagout procedures for machines, such as, but not limited to, the mixer, the auger and the Bemis Packaging Line.
Recent events (2)
- — I (S) $2032.8
- — Z (S) $3696
1910.178 L01 I
- Issued
- Feb 8, 2018
- Abate by
- Mar 15, 2018
- Penalty
- Initial $2,956 · Current $2,069 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): Employees were exposed to struck by hazards. Forklift operators had not received forklift training. Employees had not received forklift training initially than at least once every three years.
Recent events (2)
- — I (S) $2069.2
- — Z (S) $2956
1910.219 D01
- Issued
- Feb 8, 2018
- Penalty
- Initial $4,434 · Current $2,439 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Employees were exposed to amputation hazards. Employees were exposed to ingoing nippoints from the belts and pulleys which were not adequately guarded within seven feet of the floor. The pulleys were not guarded for the grinder takeaway auger located in the basement.
Recent events (2)
- — I (S) $2438.7
- — Z (S) $4434
1910.219 E03 I
- Issued
- Feb 8, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): Employees were exposed to amputation hazards. Employees were exposed to ingoing nippoints from the belts and pulleys which were not adequately guarded within seven feet of the floor. The belts were not guarded for the grinder takeaway auger located in the basement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Feb 8, 2018
- Penalty
- Initial $2,956 · Current $1,626 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: Employee was exposed to air embolism hazards. Employees were using compressed air for cleaning in the Shipping Warehouse. The hose did not have a safety nozzle and the air was operating at 55. 7 p.s.i.
Recent events (2)
- — I (S) $1625.8
- — Z (S) $2956
1910.307 C
- Issued
- Feb 8, 2018
- Abate by
- Feb 28, 2018
- Penalty
- Initial $3,696 · Current $2,033 Reduced
General-duty citation text
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: Employees were exposed to explosion hazards. Employees were exposed to light fixtures that were not intrinsically safe in the Mill Basement. One ceiling light fixture and one florescent light fixture did not have the cover to make the light intrinsically safe in the Mill Basement.
Recent events (2)
- — I (S) $2032.8
- — Z (S) $3696
More inspections at Butler Milling & Sales, LLC
View Butler Milling & Sales, LLC's full OSHA safety record →
More inspections in this industry (NAICS 311119)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342777877.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.