Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MARSHALLS OF MA, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MARSHALLS OF MA, INC. in 2300 MILLER RD., DECATUR, GA 30035 (NAICS 493110). OSHA activity number 342802048.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Marshalls of MA, INC. — free Get an email when a new federal OSHA severe-injury report for Marshalls of MA, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2300 MILLER RD.
City
DECATUR
State
GA
ZIP
30035
Mailing
2300 MILLER RD., DECATUR, GA 30035
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493110
Employees
1072
Ownership type
A

6 citations on file for this inspection.

1910.22 D02

Deleted Serious Gravity 10 1 instance 10 exposed
Issued
May 10, 2018
Abate by
Jun 6, 2018
Penalty
Initial $12,934 · Current $0 Reduced
29 CFR 1910.22(d)(2): Hazardous conditions were not immediately repaired or properly guarded before an employee used the walking-working surface.   On or about November 30, 2017, employees were exposed to struck-by hazards when the middle expansion joint on the aisle next to the SR department caused loads carried by standup Crown forklifts to sway as the forklift traveled over the expansion joint.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — D (S) $0
  • — C (S) $12934
  • — Z (S) $12934

1910.178 O01

Other-than-serious 1 instance 10 exposed
Issued
May 10, 2018
Abate by
Apr 22, 2019
Penalty
Initial $0 · Current $10,000
29 CFR 1910.178(o)(1): The employer did not ensure that only stable or safely arranged loads were handled:    On or about November 30, 2017, employees were exposed to struck-by hazards when employees moved loads that rocked as employees passed over the middle expansion joint in the aisle next to the SR department.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — F (O) $10000
  • — C (S) $0
  • — Z (S) $0

1910.178 N06

Other-than-serious 1 instance 10 exposed
Issued
May 10, 2018
Abate by
Apr 22, 2019
Penalty
Initial $12,934 · Current $10,434 Reduced
29 CFR 1910.178(n)(6): Industrial truck drivers were not required to look in the direction of, and keep a clear view of the path of travel:    On or about November 30, 2017, employees were exposed to struck-by hazards when the employees looked back at their loads while traveling around corners and while traveling over an expansion joint in the floor.  Employee did not look back in the direction of travel when backing up in order to align with a floor conveyor.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — F (O) $10434
  • — C (S) $12934
  • — Z (S) $12934

1910.219 D01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
May 10, 2018
Abate by
Jun 6, 2018
Penalty
Initial $9,239 · Current $0 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  On or about November 30, 2017, employees were exposed to caught-in hazards at the conveyor drive system labeled D40568 when performing the following work: a.  employees climbed a ladder to clear jams on the overhead conveyor b.  employees climbed a ladder or used a lift to get to the disconnect in order to lock out the conveyor for maintenance    In the alternative: 29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about November 30, 2017, employees were exposed to caught-in hazards at the conveyor drive system labeled D40568 when performing the following work without locking out prior to climbing a ladder or using a lift to approach the conveyor drive system: a.  employees climbed a ladder to clear jams on the overhead conveyor b.  employees climbed a ladder or used a lift to get to the disconnect in order to lock out the conveyor for maintenance
Recent events (3)
  • — D (S) $0
  • — C (S) $9239
  • — Z (S) $9239

1910.1030 F01 I

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
May 10, 2018
Abate by
Jun 6, 2018
Penalty
Initial $9,239 · Current $0 Reduced
29 CFR 1910.1030(f)(1)(i): The employer did not make available the hepatitis B vaccine and vaccination series to all employees who have occupational exposure:  On or about November 30, 2017, employees were exposed to bloodborne pathogens when maintenance employees who unclog toilets using plungers and/or augers and their hands were not offered hepatitis B vaccinations.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
  • — D (S) $0
  • — C (S) $9239
  • — Z (S) $9239

1910.1030 G02 I

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
May 10, 2018
Abate by
Jun 6, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1030(g)(2)(i): The employer did not ensure that each employee with occupational exposure participated in a training program:  On or about November 30, 2017, employees were exposed to bloodborne pathogens when maintenance employees who unclog toilets using plungers and/or augers and their hands did not receive bloodborne pathogen training.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
  • — D (S) $0
  • — C (S) $0
  • — Z (S) $0

View Marshalls of MA, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342802048.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.