VANCE, AL —
OSHA Inspection: KYKENKEE, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of KYKENKEE, INC. in 18719 HIGHWAY 11 NORTH P.O. BOX 290, VANCE, AL 35490 (NAICS 321113). OSHA activity number 342808953.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KYKENKEE, INC.
- Site address
- 18719 HIGHWAY 11 NORTH P.O. BOX 290
- City
- VANCE
- State
- AL
- ZIP
- 35490
- Mailing
- 18719 HIGHWAY 11 NORTH P.O. BOX 290, VANCE, AL 35490
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 660
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 7, 2018
- Abate by
- Mar 20, 2018
- Penalty
- Initial $8,481 · Current $6,900 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) On or about 11/24/2017 - Mill Building #12, Cooper Bottom Belt Trimmer, employees were crossing over the conveyor system to oil the trimmer chain without locking out the equipment.
Recent events (2)
- — I (S) $6900
- — Z (S) $8481
1910.147 C07 I
- Issued
- Feb 7, 2018
- Abate by
- Mar 20, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program was understood by affected level employees. (a) On or about 11/24/2017 - Mill Building #12, Cooper Bottom Belt Trimmer, employees were not adequately trained on their limitations as affected level lockout/tagout employees in that they engaged in maintenance and servicing activities such as oiling the trimmer chain.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Feb 7, 2018
- Penalty
- Initial $8,481 · Current $5,100 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) On or about 12/04/2017 - Mill Building #12, a periodic inspection of the energy control procedure for the Bottom Chip Belt had not been performed since March 07, 2014.
Recent events (2)
- — I (S) $5100
- — Z (S) $8481
1904.39 A02
- Issued
- Feb 7, 2018
- Penalty
- Initial $7,068 · Current $1,000 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours: (a) On or about 12/04/2017 - KyKenKee, Inc., an injury that occurred on 11/24/2017 that resulted in a medical amputation on 11/24/2017 was not reported to OSHA.
Recent events (2)
- — I (O) $1000
- — Z (O) $7068
More inspections at Kykenkee, INC.
View Kykenkee, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342808953.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.