CENTREVILLE, AL —
OSHA Inspection: KYKENKEE, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of KYKENKEE, INC. in 2684 MONTEVALLO ROAD/HIGHWAY 25, CENTREVILLE, AL 35042 (NAICS 321113). OSHA activity number 347283665.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Kykenkee, INC. — free
Get an email when a new federal OSHA severe-injury report for Kykenkee, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- KYKENKEE, INC.
- Site address
- 2684 MONTEVALLO ROAD/HIGHWAY 25
- City
- CENTREVILLE
- State
- AL
- ZIP
- 35042
- Mailing
- P.O. BOX 290, VANCE, AL 35490
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 650
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.28 B01 I
- Issued
- Aug 7, 2024
- Abate by
- Sep 11, 2024
- Penalty
- Initial $9,218 · Current $9,218
General-duty citation text
29 CFR 1910.28(b)(1)(i): Except as provided elsewhere in this section 29 CFR 1910.28, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i): a.) At 2684 Montevallo Road/Hwy 25, Centreville, AL: On or about 02/07/2024, the employer exposed employees to fall hazards in that fall protection was not provided when working at heights above 4 feet on the platform/catwalk behind the end trimmer saw. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (O) $9218
- — C (S) $9218
- — Z (S) $9218
1910.147 C06 I
- Issued
- Aug 7, 2024
- Abate by
- Sep 11, 2024
- Penalty
- Initial $16,131 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a.) At 2684 Montevallo Road/Hwy 25, Centreville, AL: On or about 02/07/2024, the employer did not conduct period inspections of the energy control procedures annually. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (S) $0
- — C (S) $16131
- — Z (S) $16131
1910.147 C07 I
- Issued
- Aug 7, 2024
- Abate by
- Sep 11, 2024
- Penalty
- Initial $11,524 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a.) At 2684 Montevallo Road/Hwy 25, Centreville, AL: On or about 02/07/2024, the employer had not trained employees in a language or vocabulary in which the employees could understand the employers hazardous energy control program. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (S) $0
- — C (S) $11524
- — Z (S) $11524
1910.147 C07 I A
- Issued
- Aug 7, 2024
- Abate by
- Sep 11, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A):Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: a.) At 2684 Montevallo Road/Hwy 25, Centreville, AL: On or about 02/07/2024, the employer had not trained employees to isolate/lock out all of the energy sources, when shutting down the trimmer finishing saw. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.212 A03 IV F
- Issued
- Aug 7, 2024
- Abate by
- Sep 11, 2024
- Penalty
- Initial $16,131 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(iv)(f): The point of operation of power saws whose operation exposed an employee to injury were not guarded: a.) At 2684 Montevallo Road/Hwy 25, Centreville, AL: On or about 02/07/2024, the employer exposed employees to amputation and caught-in hazards, in that the power saw operations were not guarded on the catwalk employees used to access the trimmer finishing saw. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- — F (S) $0
- — C (S) $16131
- — Z (S) $16131
1904.30 A
- Issued
- Aug 7, 2024
- Abate by
- Sep 11, 2024
- Penalty
- Initial $2,304 · Current $2,304
General-duty citation text
29 CFR 1904.30(a):The Employer did not maintain separate OSHA 300 Logs for each establishment that is expected to be in operation for one year or longer. a.) At 2684 Montevallo Road/Hwy 25, Centreville, AL: On or about 02/07/2024, separate OSHA 300a logs were not maintained for each facility location. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (O) $2304
- — C (O) $2304
- — Z (O) $2304
1904.32 B04 III
- Issued
- Aug 7, 2024
- Abate by
- Sep 24, 2024
- Penalty
- Initial $2,304 · Current $0 Reduced
General-duty citation text
29 CFR 1904.32(b)(4)(iii): The highest ranking company official working at the establishment did not certify the OSHA 300A Annual Summary of Work-Related Injuries and Illnesses. a.) At 2684 Montevallo Road/Hwy 25, Centreville, AL: On or about 02/07/2024, the OSHA 300a logs were not reviewed and certified by the highest ranking company officer. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
- — F (O) $0
- — C (O) $2304
- — Z (O) $2304
More inspections at Kykenkee, INC.
Sep 28, 2020
VANCE, AL
Apr 30, 2019
VANCE, AL
Dec 4, 2017
VANCE, AL
May 9, 2013
VANCE, AL
Feb 18, 2011
VANCE, AL
View Kykenkee, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
Jul 15, 2026
Crawford County Hardwoods, LLC · COCHRANTON, PA
Jul 15, 2026
Crawford County Hardwoods, LLC · COCHRANTON, PA
Jul 9, 2026
Binderholz Live OAK LLC · LIVE OAK, FL
Jul 8, 2026
Clark Lumber Company, LLC · LAFAYETTE, TN
Jul 7, 2026
317744699 - Stimson Lumber Company · GASTON, OR
More inspections in AL
Jul 16, 2026
Express OIL Change Franchise, LLC · MONTGOMERY, AL
Jul 16, 2026
Francisco Arias · FAIRHOPE, AL
Jul 16, 2026
Francisco Ares · FAIRHOPE, AL
Jul 16, 2026
Carlos CHE · LOXLEY, AL
Jul 16, 2026
ALL South Steelworx, LLC · TRUSSVILLE, AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347283665.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.