DALLAS, TX —
OSHA Inspection: CTS WOOD DESIGN, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CTS WOOD DESIGN, LLC in 8221 CHANCELLOR ROW, DALLAS, TX 75247 (NAICS 337110). OSHA activity number 342841434.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CTS WOOD DESIGN, LLC
- Site address
- 8221 CHANCELLOR ROW
- City
- DALLAS
- State
- TX
- ZIP
- 75247
- Mailing
- 8221 CHANCELLOR ROW, DALLAS, TX 75247
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 20
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 13, 2018
- Abate by
- Apr 2, 2018
- Penalty
- Initial $5,174 · Current $1,850 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a) On or about December 19, 2017, in the warehouse, where employees were exposed to crushed-by hazards from falling objects by the following: 1. The racking system did not have plaques containing the maximum permissible unit load and/or maximum uniformly distributed load per level, and/or the racking system did not have the maximum total load per bay.
Recent events (2)
- — I (S) $1850
- — Z (S) $5174
1910.178 L01 I
- Issued
- Feb 13, 2018
- Abate by
- Mar 12, 2018
- Penalty
- Initial $5,174 · Current $1,850 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) On or about December 19, 2017, where employees operated powered industrial trucks without having first completed training consisting of formal instruction, practical training, and an evaluation of the operators performance in the workplace.
Recent events (2)
- — I (S) $1850
- — Z (S) $5174
1910.213 C01
- Issued
- Feb 13, 2018
- Abate by
- Mar 12, 2018
- Penalty
- Initial $5,174 · Current $1,850 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular hand-fed ripsaw(s) were not guarded by an automatically adjusting hood, which completely enclosed that portion of the saw above the table and above the material being cut a) This violation was observed on or about December 19, 2017, where at least four (4) panel saws where being operated without the hood, exposing employees to amputation hazards.
Recent events (2)
- — I (O) $1850
- — Z (S) $5174
1910.213 C02
- Issued
- Feb 13, 2018
- Abate by
- Mar 12, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Each hand-fed circular ripsaw was not furnished with a spreader to prevent material from squeezing the saw of being thrown back on the operator: a) This violation was observed on or about December 19, 2017, where at least four (4) panel saws where being operated without the spreader, exposing employees to amputation hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.213 C03
- Issued
- Feb 13, 2018
- Abate by
- Mar 12, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. a) This violation was observed on or about December 19, 2017, where at least four (4) panel saws were being operated without the use of non-kickback fingers or dogs, exposing employees to struck-by hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.303 B02
- Issued
- Feb 13, 2018
- Abate by
- Mar 12, 2018
- Penalty
- Initial $3,696 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing and labeling: a) This violation was observed on or about December 19, 2017, where employees were exposed to electrical hazards while operating the Laguna table saw that was being powered by romax electrical cable.
Recent events (2)
- — I (S) $0
- — Z (S) $3696
More inspections at CTS Wood Design, LLC
View CTS Wood Design, LLC's full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342841434.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.