RACINE, WI —
OSHA Inspection: PREMIER ALUMINUM, LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of PREMIER ALUMINUM, LLC in 3633 SOUTH MEMORIAL DRIVE, RACINE, WI 53403 (NAICS 331521). OSHA activity number 342857232.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PREMIER ALUMINUM, LLC
- Site address
- 3633 SOUTH MEMORIAL DRIVE
- City
- RACINE
- State
- WI
- ZIP
- 53403
- Mailing
- 3633 SOUTH MEMORIAL DRIVE, RACINE, WI 53403
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331521
- Employees
- 140
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C01
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $7,068 · Current $5,000 Reduced
9135
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) A written respiratory protection program that included the provisions out lined in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures, was not established and implemented for required respirator use. Abrasive blaster employees were required to use supplied air respirators when cleaning metal molds in the blasting booth.
Recent events (2)
- — I (S) $5000
- — Z (S) $7068
1910.134 E01
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $5,654 · Current $2,000 Reduced
9135
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the abrasive blaster employee was required to use the respirator in the workplace.
Recent events (2)
- — I (S) $2000
- — Z (S) $5654
1910.179 J03
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $4,240 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.179(j)(3): Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section: (a) The control pendant for a three ton jib crane in the die refurbishing area was missing button markings to identify direction of travel (up, down and spin).
Recent events (2)
- — I (S) $1000
- — Z (S) $4240
1910.1000 A02
- Issued
- Jun 22, 2018
- Abate by
- Jun 18, 2019
- Penalty
- Initial $5,654 · Current $4,500 Reduced
9135
General-duty citation text
29 CFR 1910.1000(a)(2): Employee(s) were exposed to an airborne concentration of Particulates Not Otherwise Regulated (PNOR) listed in Table Z-1 in excess of the 8 hour Time Weighted Average concentration of (15 mg/m3): (a) The employee cleaning metal die molds in the blasting booth was exposed to PNOR (Particulates Not Otherwise Regulated) or Total Dust at an 8-hour time weighted average of 18.801 mg/m3. This is approximately 1.25 times the Permissible Exposure Limit of 15 mg/m3. This limit is established to prevent irritation to respiratory tract and eyes. Exposure calculations include a zero increment for the 123 minutes not sampled.
Recent events (2)
- — I (S) $4500
- — Z (S) $5654
1910.1000 E
- Issued
- Jun 22, 2018
- Abate by
- Jun 18, 2019
- Penalty
- Initial $0 · Current $0
9135
General-duty citation text
29 CFR 1910.1000(e): Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d): (a) Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a). The employee cleaning metal die molds in the blasting booth was exposed to PNOR (total dust) at an 8-hour time weighted average of 18.801 mg/m3. This is approximately 1.25 times the Permissible Exposure Limit of 15 mg/m3. This limit is established to prevent irritation to the lungs, respiratory tract and eyes. Exposure calculations include a zero increment for the 123 minutes not sampled.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 F05
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein: (a) In the mold preparation area, an aftermarket spray bottle of Kroil lubricant was not tagged and labeled following GHS protocol. Kroil is an irritant and combustible liquid with a flashpoint of 132 F.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Premier Aluminum, LLC
View Premier Aluminum, LLC's full OSHA safety record →
More inspections in this industry (NAICS 331521)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342857232.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.